Here are the Questions - Good Luck
Under the files section is the power point for Maytag motors here is
the direct link to help you with the test, See you Monday
http://f1.grp.yahoofs.com/v1/MLspRZZF-9mtRLdXpQDS1kn9Xwe1ABdUhXWMeSqi4icuGjzANsc\
i9Zz8OteAUkvvX19cDMgrkL32x2dqV9ZS/Atlantis%20Motors.ppt

1. A reversable motor with two speeds has how many wires?

2. What color wire comes off of the Overlaod Protector on the Maytag
Atlantis motor?

3. What is the resistance value of the overload?

4. When testing te motor and you get two readings of 1.2 Ohms and
another of 2.3 Ohms which reading in the high speed winding?

5. When testing from the overload wire to another wire "Example Red"
and you get a reading of infinity this means the red wire is part of
what winding?

6. The centrifugal switch for the start windin is it SPST or SPDT?

7. What color wire from the timer goes to the overlaod on the motor?

8. How cme the start winding does not make direct connection to the
run winding inside the motor?

9. If a motor runs in the wash cycle but just hums in the spin the
problem is most likely with the?

10. What winding is the violet wire connected to and what motor
terminal does it connect to on the motor?