--- In
SouthFloridaApplianceTechnicians@yahoogroups.com, "dolphinz_us"
<dolphinz_us@...> wrote:
>
> Here are the Questions - Good Luck
> Under the files section is the power point for Maytag motors here is
> the direct link to help you with the test, See you Monday
> http://f1.grp.yahoofs.com/v1/MLspRZZF-
9mtRLdXpQDS1kn9Xwe1ABdUhXWMeSqi4icuGjzANsci9Zz8OteAUkvvX19cDMgrkL32x2d
qV9ZS/Atlantis%20Motors.ppt
>
> 1. A reversable motor with two speeds has how many wires?
> six
> 2. What color wire comes off of the Overlaod Protector on the
Maytag
> Atlantis motor?
> yellow
> 3. What is the resistance value of the overload?
> zero
> 4. When testing te motor and you get two readings of 1.2 Ohms and
> another of 2.3 Ohms which reading in the high speed winding?
> 1.2 ohms is high speed winding
> 5. When testing from the overload wire to another wire "Example
Red"
> and you get a reading of infinity this means the red wire is part of
> what winding?
> start winding
> 6. The centrifugal switch for the start windin is it SPST or SPDT?
> spst
> 7. What color wire from the timer goes to the overlaod on the
motor?
> i don't know
> 8. How cme the start winding does not make direct connection to the
> run winding inside the motor?
> i don't know
> 9. If a motor runs in the wash cycle but just hums in the spin the
> problem is most likely with the?
> motor is bad
> 10. What winding is the violet wire connected to and what motor
> terminal does it connect to on the motor?
> run winding and v