Hi Barry,

As you can see the Predictor's line leads the main line because the
momentum(or double momentum) is added to the main line. Also it's the
main reason of overshooting. You can change the Predictor's amplitude
by means of PredictMult value(0...1).

How to use this indicator:
-Try to apply Signal line to the Predictor (SignalMode=1) and you'll
receive leading signal for turning points.
-Try to compare PolyFitPredictor with PredictMode=1 and PredictMode=2.
With the last you receive earlier signal.

More info about this technique you can find here
http://www.mesasoftware.com/Seminars/PREDICT.ppt

Important: I've uploaded fixed version of PolyFitPredictor (v1.1).

Best Regards,
Igor

--- In TrendLaboratory@yahoogroups.com, "Barry Seeger" <bseeger@...>
wrote:
>
> Hi Igorad,
>
> Thanks for your new PolyFitPredictor.  I have looked at it on a
chart and I
> see that it has a yellow line, a green line and a dashed red line
which look
> like 3 MA's.
>
>
>
> I also see that the yellow line can lead the closing price of the
current
> bar -  if price is going up, the yellow line will eventually be
above the
> close of the current bar, unlike MA's.  This means that late in a
trend it
> points towards future price, but at tops and bottoms it overshoots.
>
>
>
> I'm not sure how I would use it - have you given thought to trading
rules
> for it?
>
>
>
> Barry
>
>
>
>   _____
>
> From: TrendLaboratory@yahoogroups.com
> [mailto:TrendLaboratory@yahoogroups.com] On Behalf Of igorad2003
> Sent: Friday, 23 November 2007 9:58 PM
> To: TrendLaboratory@yahoogroups.com
> Subject: [TrendLaboratory] Predictive Tool.
>
>
>
> Hi,
> I think each trader dreams about some predictive indicator, besides it
> should be smoothed and go before price(or main line).
> So I've decided to develop something which could meet these
> requirements.
> Please try to use my new tool - PolyFitPredictor.
> This indicator has Predictor line (yellow by default) with following
> formula:
> - for 1st Order(PredictMode=1):
> Predictor = Poly + Mult*(Poly - Poly[1])
> - for 2nd Order(PredictMode=2):
> the same formula but for Predictor instead Poly,
>
> where Mult(PredictMult) - Amplitude Multiplier(0...1)
>
> Also in the indicator you can find Signal(Trigger) line which can be
> applied to Poly (SignalMode=0) or Predictor(SignalMode=1).
>
> To Agustin:
> Sorry I have not any experience with Fisher_Yur4ik_v2 and Waddah Attar
> Explosion, but I know 1st is wrong coded indicator, 2nd is combination
> of MACD and Standard Deviation with some controversial points.
>
> CCI is one of the most popular indicators and I know that Strategic
> Swiss Trading System by Chuck Le Beau uses CCI(20) with triggers at
> 170/-170 as main signal without any other filters
> (http://www.tradercl <http://www.traderclub.com/systems_strategic.htm>
> ub.com/systems_strategic.htm).
>
> Best Regards,
> Igor
>

Jeremy,

Updated version of TrendRSI you can find in www.tradecurrency.ca folder.

Regards,
Igor

--- In TrendLaboratory@yahoogroups.com, "jldelta" <jlyell@...> wrote:
>
> Hi, Igor,
>
> Have you posted the TrendRSI v1 indicator els that is shown in a couple
> of jpg charts in the Netpicks folder on this site, please ? I can't
> find it, but guess it must be right under my nose !
>
> Thanks,
>
> J.
>

Hi, Igor,

Have you posted the TrendRSI v1 indicator els that is shown in a couple
of jpg charts in the Netpicks folder on this site, please ? I can't
find it, but guess it must be right under my nose !

Thanks,

J.

As per usual, you do magnificent work and it is very much appreciated
Igor.  I will be sure to examine the performance of predictive tool
and see whether it can augment my trading even further.

Regarding Igor's comments on CCI, I must concur.  Whilst it is not my
choice of indicator I know some whom have used it for a long while in
their trading career with great success.  Like any Oscillator type
interpretive tool though, you must be aware it is occasionally prone
to divergence and can stay overbought/sold if price is pushed by
strong momentum.
The traders I know use the CCI across various TF's and play the +200,
100, 0, -100, -200 reversal/crosses for triggers with a MA setting of
200.

Give it a shot people.

When you have a moment Igor, reply to my several emails which I have
sent to your yahoo address please.  I realize you have been busy.

Kind regards.

Brian

Hi,
I think each trader dreams about some predictive indicator, besides it
should be smoothed and go before price(or main line).
So I've decided to develop something which could meet these
requirements.
Please try to use my new tool - PolyFitPredictor.
This indicator has Predictor line (yellow by default) with following
formula:
- for 1st Order(PredictMode=1):
  Predictor = Poly + Mult*(Poly - Poly[1])
- for 2nd Order(PredictMode=2):
  the same formula but for Predictor instead Poly,

where Mult(PredictMult) - Amplitude Multiplier(0...1)

Also in the indicator you can find Signal(Trigger) line which can be
applied to Poly (SignalMode=0) or Predictor(SignalMode=1).

To Agustin:
Sorry I have not any experience with Fisher_Yur4ik_v2 and Waddah Attar
Explosion, but I know 1st is wrong coded indicator, 2nd is combination
of MACD and Standard Deviation with some controversial points.

CCI is one of the most popular indicators and I know that Strategic
Swiss Trading System by Chuck Le Beau uses CCI(20) with triggers at
170/-170 as main signal without any other filters
(http://www.traderclub.com/systems_strategic.htm).

Best Regards,
Igor

Dear Members

I am requesting in behalf of Igor (and common sense - which there
isn't a lot of) that Members of the TrendLab forum DO NOT POST IGORS
INDICATORS AT PUBLIC FORUMS.

I am unhappy to state that one of the members here (whom I won't
name) has already posted one of the new Polynomial indicators at
TSD.  I know this is not always carried out with malicious intent and
perhaps they wanted technical help but posting at public forums is
NOT the way to do it.  THINK before you act.

1)  Igor has worked hundreds of hours on many of each of these
indicators, some which have cutting edge calculus math and are
similar to tools sold for 2 - 3K in TradeStation format.  It is an
insult to then see these stolen from public forums, renamed and then
hocked on Ebay for $29.95.
Igor is one of the only kind people that posts mq4 code and I'm sure
none of you wish this to change.  Without code, you cannot implement
the inner workings into your EA design, so here again, THINK BEFORE
DOING SOMETHING DAFT.
If Igor want's a certain indicator released to other forum (as done
in past (to PAID section of TSD) only he can issue it.

2)  If you feel that you need help with the indicator logic or
insertion into EA, then by all means approach Igor here since he is
the best person to ask.  Additionally there are other smart
programmers available that might assist.
I personally do not know a great deal about programming and yet treat
Igors indicators more protectively than if I had created them
myself.  Nothing in life is free so when I require good programming,
I PAY for professional services and never pass across intellectual
property without signed NDA first.
Most of the free programmers at public forums are either 1)Hacks or
2)Offering services to see if you have a system/tools worthy of
stealing.

In the end you only get what you pay for.  In my experience (and I
have gone through 4 programmers across the globe)it is best to source
a local 'non trader' reputable C++ programmer and have them
familiarize themselves with MT4.  These are professional folk that
deal with multiple systems all the time and although it might take a
short while for them to adapt to the MT4 station, you will be happy
you went with a IT pro rather than 'faceless entity' hiding on a
chatroom.

If you have any doubts about indicators, PLEASE ask Igor first.

Many thanks

Brian

Hi,
I've developed some new PolyFit Tools:

- PolyFitDetrend_v1 - polynomial version of well-known Detrend
indicator. It's good tool for estimation of overbought/oversold
situations.
- PolyFitOscillator_v1 - represents the number of standard deviations
of current price from the regression line (PolyFitMA). It can be used
like polynomial analogue of CCI.
- PolyFitTrend_v1 - looks like other indicators of this kind
(VoltyChannel_Stop and so on) but it's based on PolyFitBands.

Regards,
Igor

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Hi,
I've developed some new PolyFit Tools:

- PolyFitDetrend_v1 - polynomial version of well-known Detrend
indicator. It's good tool for estimation of overbought/oversold
situations.
- PolyFitOscillator_v1 - represents the number of standard deviations
of current price from the regression line (PolyFitMA). It can be used
like polynomial analogue of CCI.
- PolyFitTrend_v1 - looks like other indicators of this kind
(VoltyChannel_Stop and so on) but it's based on PolyFitBands.

Regards,
Igor

Hi Igor.

The AbsoluteStrength_v2 looks better, more easy to read.

Let me know more about the filters, may be you can give me more
orientation to use it or to understand it. As I understand the
filters can be any indicator: filters to measure the velocity,
filters to measure the acceleration, filters to measure the distance
of the current price versus the some kind of average, etcetera. But
when you mentioned "so-called Filters" you make me think if you
mention the word Filter only to mention some kind of indicators. I
will appreciate that you clarify this point, because for me Filters
are all the indicators or techniques that serve us to make a better
decision when we see a signal.

By the way, I would like to know how do you measure the potency of
the movements, I call potency to the decent movements of the price.
May be that you understand it movements like an impulsive movement.
You must know the Waddah Attar Explosion indicator, that is used to
choose decent movements. Instead this indicator I use the traditional
CCI to measure the potency of the movement, because I observe that
the values of CCI superiors of 100 or below to -100 are very similar
to the readings of Waddah Attar Explosion. Also, I use the Fisher
Yut4ik_v2 indicator to help me in the identification of good
movements, but this indicator repaint itself, then, it is a little
dificult to read. Then, I would like to know which are the indicators
that you use to choose a decent movement of price (to measure the
posible potency of the movement that it is coming)?

Thanks a lot for your patience.

Agustin



--- In TrendLaboratory@yahoogroups.com, "igorad2003" <igorad2003@...>
wrote:
>
> Hi Agustin,
>
> More info about Efficiency's Levels you can find here:
> http://www.bigtrends.com/document.jsp?documentid=899
> But I don't use them in my systems.
>
> TrendFishEfficiency uses Fisher Transform from Ehlers works instead
of
> additional smoothing by MA. It gives sharper turning points and
maybe
>  a little earlier.
>
> From my previous post you should understand that majority of so-
called
> Filters is based on measuremant of price inertia. Concept of inertia
> is associated with Velocity's value. So Velocity is the mother of
> majority dynamic filters. But the main problem is how to measure
this
> value. It can be simply difference between 2 MAs (ex. AO
(B.Williams),
> MACD, OsMA etc.) or multiple(2...4) smoothings of instantaneous
> velocity (difference between nearest prices or MAs(so-called slope))
> and so on. Yesterday I've added Polynomial Velocity(PolyFitVelocity)
> to our toolbox. This indicator gives good performance without
> additional smoothing. I think it can serve like specimen for other
> velocity indicators because of strong theoretical base.
>
> About AbsoluteStrength:
> Maybe you know decomposition of price changes(for N bars) on
> components (Bull and Bear) is used in AbsoluteStrength indicator
like
> in RSI. Moreover I've implemented in this indicator other 2 methods
> for Stochastic and ADX(DMI). Really you can find something very
> similar with other velocity indicators. But I think you can read
> market conditions more precisely with AS.
>
> I've uploaded 2 new versions of AbsoluteStrength:
> -v2 : with additional smoothing and turning points instead of signal
> line.
> -v3 : with additional smoothing and signal line.
> Any turning points or crosses with signal line give us good reasons
> for opening or protection(closing) positions.
>
> Please enjoy new indicators! :)
>
> Regards,
> Igor
>
> --- In TrendLaboratory@yahoogroups.com, Agustín <saadei11@> wrote:
> >
> >
> > Hi Igor.
> >
> > The levels +30 and -30 of TrendEfficiency delimit the overbought
and
> > oversold areas? Where can we read some about the use of this
> > indicator?
> >
> > As I understand the difference between TrendEfficiency and
> > TrendFishEfficency is that TrendFishEffiicency is normalized with
the
> > procedure of Ehlers (Gaussian PDF). Am I right? If my supposition
is
> > true, could you translate the levels +30 and -30 from
TrendEfficiency
> > to TrendFishEfficency range of values? I would prefer to use the
> > Fisher option.
> >
> > And, thanks for your great effort with this excellent indicators.
> >
> > Thanks.
> >
> > Agustin
> >
> >
> > --- In TrendLaboratory@yahoogroups.com, Agustín <saadei11@> wrote:
> > >
> > >
> > > Hi Igor.
> > >
> > > I understand. Then, each trader must choose its own indicators
that
> > > permit us to know what the market is doing. And it indicators
> > should
> > > help us to understand the following concepts:
> > > - Average
> > > - High and Low
> > > - Velocity
> > > - Acceleration
> > >
> > > And, I infer from you explanation that you don't have best
> > > indicators, may be you have prefer indicators for your job and
> > invite
> > > us to choose our best indicators from the files.
> > >
> > > ***
> > >
> > > The new tools you mentioned here sounds very interesting.
> > >
> > > ***
> > >
> > > Thank you very much for your answer and suggestions.
> > >
> > > Regards.
> > >
> > >
> > > Agustín
> > >
> > >
> > >
> > > --- In TrendLaboratory@yahoogroups.com, "igorad2003"
<igorad2003@>
> > > wrote:
> > > >
> > > > Hi Agustin,
> > > >
> > > > I wish to answer with allegory on your seemingly simple
question:
> > > >
> > > > For safe driving(trading) the car(on the market) you should
see
> > road
> > > > with the central line(some kind of MAs) and borders(high and
low
> > > > pivots), should have a speedometer(some kind of Velocity(or
> > > Momentum)
> > > > indicator) and should hear the engine (or have a tachometer)
(some
> > > kind
> > > > of Acceleration indicator).
> > > >
> > > > I've added some new tools into Efficiency and Momentum
indicators
> > > > folders. TrendEfficiency and NonLagVelocity are used in my
> > contest
> > > EA.
> > > >
> > > > Also I wish to inform you that I've finished some Polynomial
> > > > tools(looks very interesting). So you can find them in the
> > > > correspondent folder:
> > > >
> > > > -PolyFitMA_v1 (polynomial MA with fitting and moving(actual)
> > modes)
> > > > -PolyFitBands (similar to one of the most expensive Jan Arps
> > > > tool(so-called Arps-Hurst Bands))
> > > > -PolyFitVelocity and PolyFitAcceleration (1st and 2nd
derivatives
> > of
> > > > polynom)
> > > > -PolyFitDerivative (excellent tool without any analogs: you
can
> > > > calculate any derivative(Order:0-MA,1-Velocity,2-
Acceleration) of
> > > polynom)
> > > >
> > > > Also I didn't forget about NetPicks tools,because I think we
can
> > > > create something better with our new tools.
> > > >
> > > > Regards,
> > > > Igor
> > > >
> > > >
> > > > --- In TrendLaboratory@yahoogroups.com, Agustín <saadei11@>
wrote:
> > > > >
> > > > >
> > > > > Hi Igorad.
> > > > >
> > > > > First, I want to tell you thanks, because the thread you
> > > suggested me
> > > > > (message #300) (thread of walterw) is a great thread.
> > > > >
> > > > > Second. It can be that an idiot question, but really I
believe
> > > that
> > > > > there are no idiot questions, for that reason prefer to do
it:
> > > > >
> > > > > Into the indicators that you are development, what are you
> > > consider
> > > > > the best indicators that act like a filters?
> > > > >
> > > > > I like the Absolute Strength, but I consider that the AbSt
is
> > > very
> > > > > similar to Sthochastic indicator. I probe it. Obviously, we
can
> > > > > obtain from AbSt different views in comparison of the
> > stochastic.
> > > > >
> > > > > You mentioned that you were been looking for the best one
of
> > the
> > > > > indicators than served as filter, at this moment according
to
> > > your
> > > > > experience you perhaps have an opinion of it that you could
> > share.
> > > > >
> > > > > I know you are a very busy person. Don't worry if you need
some
> > > time
> > > > > to answer this thread.
> > > > >
> > > > > Thanks again.
> > > > >
> > > > > Agustín
> > > > >
> > > >
> > >
> >
>

Hi Agustin,

More info about Efficiency's Levels you can find here:
http://www.bigtrends.com/document.jsp?documentid=899
But I don't use them in my systems.

TrendFishEfficiency uses Fisher Transform from Ehlers works instead of
additional smoothing by MA. It gives sharper turning points and maybe
  a little earlier.

From my previous post you should understand that majority of so-called
Filters is based on measuremant of price inertia. Concept of inertia
is associated with Velocity's value. So Velocity is the mother of
majority dynamic filters. But the main problem is how to measure this
value. It can be simply difference between 2 MAs (ex. AO (B.Williams),
MACD, OsMA etc.) or multiple(2...4) smoothings of instantaneous
velocity (difference between nearest prices or MAs(so-called slope))
and so on. Yesterday I've added Polynomial Velocity(PolyFitVelocity)
to our toolbox. This indicator gives good performance without
additional smoothing. I think it can serve like specimen for other
velocity indicators because of strong theoretical base.

About AbsoluteStrength:
Maybe you know decomposition of price changes(for N bars) on
components (Bull and Bear) is used in AbsoluteStrength indicator like
in RSI. Moreover I've implemented in this indicator other 2 methods
for Stochastic and ADX(DMI). Really you can find something very
similar with other velocity indicators. But I think you can read
market conditions more precisely with AS.

I've uploaded 2 new versions of AbsoluteStrength:
-v2 : with additional smoothing and turning points instead of signal
line.
-v3 : with additional smoothing and signal line.
Any turning points or crosses with signal line give us good reasons
for opening or protection(closing) positions.

Please enjoy new indicators! :)

Regards,
Igor

--- In TrendLaboratory@yahoogroups.com, Agustín <saadei11@...> wrote:
>
>
> Hi Igor.
>
> The levels +30 and -30 of TrendEfficiency delimit the overbought and
> oversold areas? Where can we read some about the use of this
> indicator?
>
> As I understand the difference between TrendEfficiency and
> TrendFishEfficency is that TrendFishEffiicency is normalized with the
> procedure of Ehlers (Gaussian PDF). Am I right? If my supposition is
> true, could you translate the levels +30 and -30 from TrendEfficiency
> to TrendFishEfficency range of values? I would prefer to use the
> Fisher option.
>
> And, thanks for your great effort with this excellent indicators.
>
> Thanks.
>
> Agustin
>
>
> --- In TrendLaboratory@yahoogroups.com, Agustín <saadei11@> wrote:
> >
> >
> > Hi Igor.
> >
> > I understand. Then, each trader must choose its own indicators that
> > permit us to know what the market is doing. And it indicators
> should
> > help us to understand the following concepts:
> > - Average
> > - High and Low
> > - Velocity
> > - Acceleration
> >
> > And, I infer from you explanation that you don't have best
> > indicators, may be you have prefer indicators for your job and
> invite
> > us to choose our best indicators from the files.
> >
> > ***
> >
> > The new tools you mentioned here sounds very interesting.
> >
> > ***
> >
> > Thank you very much for your answer and suggestions.
> >
> > Regards.
> >
> >
> > Agustín
> >
> >
> >
> > --- In TrendLaboratory@yahoogroups.com, "igorad2003" <igorad2003@>
> > wrote:
> > >
> > > Hi Agustin,
> > >
> > > I wish to answer with allegory on your seemingly simple question:
> > >
> > > For safe driving(trading) the car(on the market) you should see
> road
> > > with the central line(some kind of MAs) and borders(high and low
> > > pivots), should have a speedometer(some kind of Velocity(or
> > Momentum)
> > > indicator) and should hear the engine (or have a tachometer)(some
> > kind
> > > of Acceleration indicator).
> > >
> > > I've added some new tools into Efficiency and Momentum indicators
> > > folders. TrendEfficiency and NonLagVelocity are used in my
> contest
> > EA.
> > >
> > > Also I wish to inform you that I've finished some Polynomial
> > > tools(looks very interesting). So you can find them in the
> > > correspondent folder:
> > >
> > > -PolyFitMA_v1 (polynomial MA with fitting and moving(actual)
> modes)
> > > -PolyFitBands (similar to one of the most expensive Jan Arps
> > > tool(so-called Arps-Hurst Bands))
> > > -PolyFitVelocity and PolyFitAcceleration (1st and 2nd derivatives
> of
> > > polynom)
> > > -PolyFitDerivative (excellent tool without any analogs: you can
> > > calculate any derivative(Order:0-MA,1-Velocity,2-Acceleration) of
> > polynom)
> > >
> > > Also I didn't forget about NetPicks tools,because I think we can
> > > create something better with our new tools.
> > >
> > > Regards,
> > > Igor
> > >
> > >
> > > --- In TrendLaboratory@yahoogroups.com, Agustín <saadei11@> wrote:
> > > >
> > > >
> > > > Hi Igorad.
> > > >
> > > > First, I want to tell you thanks, because the thread you
> > suggested me
> > > > (message #300) (thread of walterw) is a great thread.
> > > >
> > > > Second. It can be that an idiot question, but really I believe
> > that
> > > > there are no idiot questions, for that reason prefer to do it:
> > > >
> > > > Into the indicators that you are development, what are you
> > consider
> > > > the best indicators that act like a filters?
> > > >
> > > > I like the Absolute Strength, but I consider that the AbSt is
> > very
> > > > similar to Sthochastic indicator. I probe it. Obviously, we can
> > > > obtain from AbSt different views in comparison of the
> stochastic.
> > > >
> > > > You mentioned that you were been looking for the best one of
> the
> > > > indicators than served as filter, at this moment according to
> > your
> > > > experience you perhaps have an opinion of it that you could
> share.
> > > >
> > > > I know you are a very busy person. Don't worry if you need some
> > time
> > > > to answer this thread.
> > > >
> > > > Thanks again.
> > > >
> > > > Agustín
> > > >
> > >
> >
>

Hi Igor.

The levels +30 and -30 of TrendEfficiency delimit the overbought and
oversold areas? Where can we read some about the use of this
indicator?

As I understand the difference between TrendEfficiency and
TrendFishEfficency is that TrendFishEffiicency is normalized with the
procedure of Ehlers (Gaussian PDF). Am I right? If my supposition is
true, could you translate the levels +30 and -30 from TrendEfficiency
to TrendFishEfficency range of values? I would prefer to use the
Fisher option.

And, thanks for your great effort with this excellent indicators.

Thanks.

Agustin


--- In TrendLaboratory@yahoogroups.com, Agustín <saadei11@...> wrote:
>
>
> Hi Igor.
>
> I understand. Then, each trader must choose its own indicators that
> permit us to know what the market is doing. And it indicators
should
> help us to understand the following concepts:
> - Average
> - High and Low
> - Velocity
> - Acceleration
>
> And, I infer from you explanation that you don't have best
> indicators, may be you have prefer indicators for your job and
invite
> us to choose our best indicators from the files.
>
> ***
>
> The new tools you mentioned here sounds very interesting.
>
> ***
>
> Thank you very much for your answer and suggestions.
>
> Regards.
>
>
> Agustín
>
>
>
> --- In TrendLaboratory@yahoogroups.com, "igorad2003" <igorad2003@>
> wrote:
> >
> > Hi Agustin,
> >
> > I wish to answer with allegory on your seemingly simple question:
> >
> > For safe driving(trading) the car(on the market) you should see
road
> > with the central line(some kind of MAs) and borders(high and low
> > pivots), should have a speedometer(some kind of Velocity(or
> Momentum)
> > indicator) and should hear the engine (or have a tachometer)(some
> kind
> > of Acceleration indicator).
> >
> > I've added some new tools into Efficiency and Momentum indicators
> > folders. TrendEfficiency and NonLagVelocity are used in my
contest
> EA.
> >
> > Also I wish to inform you that I've finished some Polynomial
> > tools(looks very interesting). So you can find them in the
> > correspondent folder:
> >
> > -PolyFitMA_v1 (polynomial MA with fitting and moving(actual)
modes)
> > -PolyFitBands (similar to one of the most expensive Jan Arps
> > tool(so-called Arps-Hurst Bands))
> > -PolyFitVelocity and PolyFitAcceleration (1st and 2nd derivatives
of
> > polynom)
> > -PolyFitDerivative (excellent tool without any analogs: you can
> > calculate any derivative(Order:0-MA,1-Velocity,2-Acceleration) of
> polynom)
> >
> > Also I didn't forget about NetPicks tools,because I think we can
> > create something better with our new tools.
> >
> > Regards,
> > Igor
> >
> >
> > --- In TrendLaboratory@yahoogroups.com, Agustín <saadei11@> wrote:
> > >
> > >
> > > Hi Igorad.
> > >
> > > First, I want to tell you thanks, because the thread you
> suggested me
> > > (message #300) (thread of walterw) is a great thread.
> > >
> > > Second. It can be that an idiot question, but really I believe
> that
> > > there are no idiot questions, for that reason prefer to do it:
> > >
> > > Into the indicators that you are development, what are you
> consider
> > > the best indicators that act like a filters?
> > >
> > > I like the Absolute Strength, but I consider that the AbSt is
> very
> > > similar to Sthochastic indicator. I probe it. Obviously, we can
> > > obtain from AbSt different views in comparison of the
stochastic.
> > >
> > > You mentioned that you were been looking for the best one of
the
> > > indicators than served as filter, at this moment according to
> your
> > > experience you perhaps have an opinion of it that you could
share.
> > >
> > > I know you are a very busy person. Don't worry if you need some
> time
> > > to answer this thread.
> > >
> > > Thanks again.
> > >
> > > Agustín
> > >
> >
>

Hi Agustin,

I wish to answer with allegory on your seemingly simple question:

For safe driving(trading) the car(on the market) you should see road
with the central line(some kind of MAs) and borders(high and low
pivots), should have a speedometer(some kind of Velocity(or Momentum)
indicator) and should hear the engine (or have a tachometer)(some kind
of Acceleration indicator).

I've added some new tools into Efficiency and Momentum indicators
folders. TrendEfficiency and NonLagVelocity are used in my contest EA.

Also I wish to inform you that I've finished some Polynomial
tools(looks very interesting). So you can find them in the
correspondent folder:

-PolyFitMA_v1 (polynomial MA with fitting and moving(actual) modes)
-PolyFitBands (similar to one of the most expensive Jan Arps
tool(so-called Arps-Hurst Bands))
-PolyFitVelocity and PolyFitAcceleration (1st and 2nd derivatives of
polynom)
-PolyFitDerivative (excellent tool without any analogs: you can
calculate any derivative(Order:0-MA,1-Velocity,2-Acceleration) of polynom)

Also I didn't forget about NetPicks tools,because I think we can
create something better with our new tools.

Regards,
Igor

--- In TrendLaboratory@yahoogroups.com, Agustín <saadei11@...> wrote:
>
>
> Hi Igorad.
>
> First, I want to tell you thanks, because the thread you suggested me
> (message #300) (thread of walterw) is a great thread.
>
> Second. It can be that an idiot question, but really I believe that
> there are no idiot questions, for that reason prefer to do it:
>
> Into the indicators that you are development, what are you consider
> the best indicators that act like a filters?
>
> I like the Absolute Strength, but I consider that the AbSt is very
> similar to Sthochastic indicator. I probe it. Obviously, we can
> obtain from AbSt different views in comparison of the stochastic.
>
> You mentioned that you were been looking for the best one of the
> indicators than served as filter, at this moment according to your
> experience you perhaps have an opinion of it that you could share.
>
> I know you are a very busy person. Don't worry if you need some time
> to answer this thread.
>
> Thanks again.
>
> Agustín
>

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Hi Igor.

I understand. Then, each trader must choose its own indicators that
permit us to know what the market is doing. And it indicators should
help us to understand the following concepts:
- Average
- High and Low
- Velocity
- Acceleration

And, I infer from you explanation that you don't have best
indicators, may be you have prefer indicators for your job and invite
us to choose our best indicators from the files.

***

The new tools you mentioned here sounds very interesting.

***

Thank you very much for your answer and suggestions.

Regards.


Agustín



--- In TrendLaboratory@yahoogroups.com, "igorad2003" <igorad2003@...>
wrote:
>
> Hi Agustin,
>
> I wish to answer with allegory on your seemingly simple question:
>
> For safe driving(trading) the car(on the market) you should see road
> with the central line(some kind of MAs) and borders(high and low
> pivots), should have a speedometer(some kind of Velocity(or
Momentum)
> indicator) and should hear the engine (or have a tachometer)(some
kind
> of Acceleration indicator).
>
> I've added some new tools into Efficiency and Momentum indicators
> folders. TrendEfficiency and NonLagVelocity are used in my contest
EA.
>
> Also I wish to inform you that I've finished some Polynomial
> tools(looks very interesting). So you can find them in the
> correspondent folder:
>
> -PolyFitMA_v1 (polynomial MA with fitting and moving(actual) modes)
> -PolyFitBands (similar to one of the most expensive Jan Arps
> tool(so-called Arps-Hurst Bands))
> -PolyFitVelocity and PolyFitAcceleration (1st and 2nd derivatives of
> polynom)
> -PolyFitDerivative (excellent tool without any analogs: you can
> calculate any derivative(Order:0-MA,1-Velocity,2-Acceleration) of
polynom)
>
> Also I didn't forget about NetPicks tools,because I think we can
> create something better with our new tools.
>
> Regards,
> Igor
>
>
> --- In TrendLaboratory@yahoogroups.com, Agustín <saadei11@> wrote:
> >
> >
> > Hi Igorad.
> >
> > First, I want to tell you thanks, because the thread you
suggested me
> > (message #300) (thread of walterw) is a great thread.
> >
> > Second. It can be that an idiot question, but really I believe
that
> > there are no idiot questions, for that reason prefer to do it:
> >
> > Into the indicators that you are development, what are you
consider
> > the best indicators that act like a filters?
> >
> > I like the Absolute Strength, but I consider that the AbSt is
very
> > similar to Sthochastic indicator. I probe it. Obviously, we can
> > obtain from AbSt different views in comparison of the stochastic.
> >
> > You mentioned that you were been looking for the best one of the
> > indicators than served as filter, at this moment according to
your
> > experience you perhaps have an opinion of it that you could share.
> >
> > I know you are a very busy person. Don't worry if you need some
time
> > to answer this thread.
> >
> > Thanks again.
> >
> > Agustín
> >
>

Hi Agustin,

I wish to answer with allegory on your seemingly simple question:

For safe driving(trading) the car(on the market) you should see road
with the central line(some kind of MAs) and borders(high and low
pivots), should have a speedometer(some kind of Velocity(or Momentum)
indicator) and should hear the engine (or have a tachometer)(some kind
of Acceleration indicator).

I've added some new tools into Efficiency and Momentum indicators
folders. TrendEfficiency and NonLagVelocity are used in my contest EA.

Also I wish to inform you that I've finished some Polynomial
tools(looks very interesting). So you can find them in the
correspondent folder:

-PolyFitMA_v1 (polynomial MA with fitting and moving(actual) modes)
-PolyFitBands (similar to one of the most expensive Jan Arps
tool(so-called Arps-Hurst Bands))
-PolyFitVelocity and PolyFitAcceleration (1st and 2nd derivatives of
polynom)
-PolyFitDerivative (excellent tool without any analogs: you can
calculate any derivative(Order:0-MA,1-Velocity,2-Acceleration) of polynom)

Also I didn't forget about NetPicks tools,because I think we can
create something better with our new tools.

Regards,
Igor


--- In TrendLaboratory@yahoogroups.com, Agustín <saadei11@...> wrote:
>
>
> Hi Igorad.
>
> First, I want to tell you thanks, because the thread you suggested me
> (message #300) (thread of walterw) is a great thread.
>
> Second. It can be that an idiot question, but really I believe that
> there are no idiot questions, for that reason prefer to do it:
>
> Into the indicators that you are development, what are you consider
> the best indicators that act like a filters?
>
> I like the Absolute Strength, but I consider that the AbSt is very
> similar to Sthochastic indicator. I probe it. Obviously, we can
> obtain from AbSt different views in comparison of the stochastic.
>
> You mentioned that you were been looking for the best one of the
> indicators than served as filter, at this moment according to your
> experience you perhaps have an opinion of it that you could share.
>
> I know you are a very busy person. Don't worry if you need some time
> to answer this thread.
>
> Thanks again.
>
> Agustín
>

Hi Barry,

During operation of MultiPositionExpert you should see always your
trades (magic=0-for all, other number for the specified EA) in the top
left corner of the chart. So you always can control your open and
pending orders.

I just checked functionality of EA and it's OK. Please look at records
from log file(ProfitTarget=2 pips):

08:43:17 MultiPositionExpert_v1.15 GBPUSD,H4: initialized
08:43:17 MultiPositionExpert_v1.15 GBPUSD,H4 inputs:
ExpertName="MultiPositionExpert_v1.15"; Data=" Input Data ";
StopManageAcc=false; Magic=0; UsePips=true; ProfitTarget=2;
MaxLoss=100; CloseMode=0; AlertMode=1;
09:07:17 MultiPositionExpert_v1.15 GBPUSD,H4: close #4923985 sell 0.10
EURCHF at 1.6737 at price 1.6736
09:07:17 MultiPositionExpert_v1.15 GBPUSD,H4: close #4923986 sell 0.10
EURUSD at 1.4169 at price 1.4173
09:07:22 MultiPositionExpert_v1.15 GBPUSD,H4: close #4923988 sell 0.10
GBPJPY at 236.25 at price 236.20
09:07:22 MultiPositionExpert_v1.15 GBPUSD,H4: Alert:
MultiPositionExpert_v1.15: Orders are closed!

Can you send me your experts log file?

Regards,
Igor




--- In TrendLaboratory@yahoogroups.com, "Barry Seeger" <bseeger@...>
wrote:
>
> Hi Igor,
> I had 2 manual trades open tonight in one account and I wanted to leave
> the computer.  I put your MultiPositionExpert v1.15 on one of the
> charts, but it didn't close the trades when my profit target for the 2
> trades combined was reached.
>
> I'm not sure why it didn't work - v1.12 has worked for me before with
> trades placed by EA's.  Does it only work with trades placed by EA's?
> Thanks,
> Barry
>

Hi Igor,
I had 2 manual trades open tonight in one account and I wanted to leave
the computer.  I put your MultiPositionExpert v1.15 on one of the
charts, but it didn't close the trades when my profit target for the 2
trades combined was reached.

I'm not sure why it didn't work - v1.12 has worked for me before with
trades placed by EA's.  Does it only work with trades placed by EA's?
Thanks,
Barry

Hi Igorad.

First, I want to tell you thanks, because the thread you suggested me
(message #300) (thread of walterw) is a great thread.

Second. It can be that an idiot question, but really I believe that
there are no idiot questions, for that reason prefer to do it:

Into the indicators that you are development, what are you consider
the best indicators that act like a filters?

I like the Absolute Strength, but I consider that the AbSt is very
similar to Sthochastic indicator. I probe it. Obviously, we can
obtain from AbSt different views in comparison of the stochastic.

You mentioned that you were been looking for the best one of the
indicators than served as filter, at this moment according to your
experience you perhaps have an opinion of it that you could share.

I know you are a very busy person. Don't worry if you need some time
to answer this thread.

Thanks again.

Agustín

Thanks a lot, Igor. I will review those links.

Agustín


--- In TrendLaboratory@yahoogroups.com, "igorad2003" <igorad2003@...>
wrote:
>
> Hi Agustin,
>
> I think that you should look at this  thread
> <http://www.traderslaboratory.com/forums/f24/walter-s-forex-trend-
trades\
> -2364.html> .
>
> Regards,
> Igor
>
> --- In TrendLaboratory@yahoogroups.com, Agustín <saadei11@> wrote:
> >
> >
> > Hi Igorad.
> >
> > I was testing the Variable MA's rainbow and I have two questions:
> >
> > The way to trade on the use of the rainbow is similar to the
Rainbow
> > of Linuxtroll?
> >
> > Rainbow of Linuxtroll:
> > http://www.kolachitrader.net/phpBB2/...er=asc&start=0
> > http://www.forexfactory.com/showthread.php?t=38436
> >
> > If it is different, do you know a thread about the use of it?
> >
> > I will appreciate your response.
> >
> > Thanks.
> >
> > Agustín
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > --- In TrendLaboratory@yahoogroups.com, Agustín saadei11@ wrote:
> > >
> > >
> > > Thanks, BalticFx.
> > >
> > > The solution was very easy, sorry.
> > >
> > > Regards.
> > >
> > > Agustin
> > >
> > >
> > > --- In TrendLaboratory@yahoogroups.com, James North <balticfx@>
> > > wrote:
> > > >
> > > > Agustin
> > > >
> > > >   Rather than just clicking on it, try right click and then
> > select
> > > from list 'save target as'.
> > > >
> > > >   Name the file, where you wish to save it and you will be
right.
> > > >
> > > >   Regards
> > > >
> > > >   BalticFx
> > > >
> > > >
> > > > Agustín <saadei11@> wrote:
> > > >
> > > > Hi Igorad. Thanks for the new indicator.
> > > >
> > > > I have a problem to download the template. When I try to
download
> > > the
> > > > file "fantail_1.tpl", it display a text, not a file to
download
> > it.
> > > >
> > > > Do you or other members have the same problem?
> > > >
> > > > Agustín
> > > >
> > > > --- In TrendLaboratory@yahoogroups.com, "igorad2003"
> > <igorad2003@>
> > > > wrote:
> > > > >
> > > > > Hi,
> > > > > I've developed interesting MA - Variable MA(VarMA) for MT4
and
> > TS.
> > > > > It's some sort of adaptive MA based on ADX.
> > > > > Try to test a template(rainbow view) with this indicator.
> > > > >
> > > > > Regards,
> > > > > Igor
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ---------------------------------
> > > > Moody friends. Drama queens. Your life? Nope! - their life,
your
> > > story.
> > > >  Play Sims Stories at Yahoo! Games.
> > > >
> > >
> >
>

Hi Igorad.

I was testing the Variable MA's rainbow and I have two questions:

The way to trade on the use of the rainbow is similar to the Rainbow
of Linuxtroll?

Rainbow of Linuxtroll:
http://www.kolachitrader.net/phpBB2/...er=asc&start=0
http://www.forexfactory.com/showthread.php?t=38436

If it is different, do you know a thread about the use of it?

I will appreciate your response.

Thanks.

Agustín













--- In TrendLaboratory@yahoogroups.com, Agustín <saadei11@...> wrote:
>
>
> Thanks, BalticFx.
>
> The solution was very easy, sorry.
>
> Regards.
>
> Agustin
>
>
> --- In TrendLaboratory@yahoogroups.com, James North <balticfx@>
> wrote:
> >
> > Agustin
> >
> >   Rather than just clicking on it, try right click and then
select
> from list 'save target as'.
> >
> >   Name the file, where you wish to save it and you will be right.
> >
> >   Regards
> >
> >   BalticFx
> >
> >
> > Agustín <saadei11@> wrote:
> >
> > Hi Igorad. Thanks for the new indicator.
> >
> > I have a problem to download the template. When I try to download
> the
> > file "fantail_1.tpl", it display a text, not a file to download
it.
> >
> > Do you or other members have the same problem?
> >
> > Agustín
> >
> > --- In TrendLaboratory@yahoogroups.com, "igorad2003"
<igorad2003@>
> > wrote:
> > >
> > > Hi,
> > > I've developed interesting MA - Variable MA(VarMA) for MT4 and
TS.
> > > It's some sort of adaptive MA based on ADX.
> > > Try to test a template(rainbow view) with this indicator.
> > >
> > > Regards,
> > > Igor
> > >
> >
> >
> >
> >
> >
> >
> > ---------------------------------
> > Moody friends. Drama queens. Your life? Nope! - their life, your
> story.
> >  Play Sims Stories at Yahoo! Games.
> >
>

Hi Brian. Thanks for its suggestion. I will review the site of FXDD.

Regards.


Agustín



--- In TrendLaboratory@yahoogroups.com, James North <balticfx@...>
wrote:
>
> Hi Agustin
>
>   I can rec with highest regard FXDD.  They are a direct subsidiary
of Tradition (3rd largest finance corp in world).
>   FXDD have impeccable customer service, seamless high volume trade
execution which bypasses the broker on one of the industries largest
servers.  Low spreads, true interbank pricing and this is all shoved
through high speed even at news release due to the fact they have
many liquidity providers.
>
>   I have been with other brokers and they all stank.
>
>   Give them a go.
>
>   www.fxdd.com
>
>   Regards
>
>   Brian
>
> Agustín <saadei11@...> wrote:
>           Hi guys.
>
> I do not know if it is correct that I ask about brokers. if Igor
does
> not have problem with this thread, then, I want to ask information
> about the following brokers:
>
> Oanda
> CMS
> ACM
> Forex.com (Gain Capital)
>
> Do you know something about them?
> If yes, what are your opinion about them?
>
> I have a small account with CMS, but I would like to change it to
> Forex.com or Oanda. At this time I have problems to conect with my
> account (second time in 1 month), without considering the big
spreads
> that they offer. This is the reason about my question.
>
> Or, which one of the brokers (others) are the best for you?
>
> Thanks.
>
> Agustín
>
>
>
>
>
>
> ---------------------------------
> Fussy? Opinionated? Impossible to please? Perfect.  Join Yahoo!'s
user panel and lay it on us.
>

Hi guys.

I do not know if it is correct that I ask about brokers. if Igor does
not have problem with this thread, then, I want to ask information
about the following brokers:

Oanda
CMS
ACM
Forex.com (Gain Capital)

Do you know something about them?
If yes, what are your opinion about them?

I have a small account with CMS, but I would like to change it to
Forex.com or Oanda. At this time I have problems to conect with my
account (second time in 1 month), without considering the big spreads
that they offer. This is the reason about my question.

Or, which one of the brokers (others) are the best for you?

Thanks.

Agustín

Hi guys.

I do not know if it is correct that I ask about brokers. if Igor does
not have problem with this thread, then, I want to ask information
about the following brokers:

Oanda
CMS
ACM
Forex.com (Gain Capital)

Do you know something about them?
If yes, what are your opinion about them?

I have a small account with CMS, but I would like to change it to
Forex.com or Oanda. At this time I have problems to conect with my
account (second time in 1 month), without considering the big spreads
that they offer. This is the reason about my question.

Or, which one of the brokers (others) are the best for you?

Thanks.

Agustín

hello igorad


  im tinkering with your step ma 7.1 and was wondering do you know what
the best settings are for this indicator?

thanx

dom

Brian,

 

We have not got the indicators in any form yet, the idea was to show Igor the chart in the hope he could recreate the indicators and post to the group as he has done with others.  

 

If you are interested the trend indicator you can add yourself by putting two LWMA  channels on the chart 21 and 34 periods. Each channel made up of the high and low of each period. When the lines cross look to trade the next candle closing above or below the channel. Simple system but always with the trend. On the 5 min they go for approx 20 point target and 20 point stop, or stop below the channel.

 

As always look at S&R points.

 

Gordon

balticfx <balticfx@yahoo.com> wrote:

Igor

Is there any intention to transfer the netpick indicator from TS format
into MT4?

I look forward to your reply

Brian

Igor

Is there any intention to transfer the netpick indicator from TS format
into MT4?

I look forward to your reply

Brian

Igor

Is there any intention to transfer the netpick indicator from TS format
into MT4?

I look forward to your reply

Brian

Gordon,
As I see NetPicks System consists of 3 indicators:
-NP_Trend (2 Channel with Signal Points)
-NP_OS/OB (looks like similar to DPO or difference between Prie and MA(45)
-NP_Calculator(complex indicator)

I've created new thread "NetPicks Tools", where you can find your
screenshots and where I'll post indicators.
Can you give me some screenshots for GBPUSD M5,for example?

Best Regards,
Igor

--- In TrendLaboratory@yahoogroups.com, "gordon597989"
<gordon.harrington@...> wrote:
>
> Igor,
>
> I have some indicators from Netpicks that they lease out, on looking
> the trend indicator is an LWMA channel based on 34 high and low and a
> 21 high and low channel. The channels are no problem but could you add
> alerts for the cross of the lines both top and bottom. I have added a
> file to the section with pictures of the indicators.
>
> The best part of the system is that it gives you an entry and target
> with stop loss, these look as if they are based on volatility, or
> recent swing highs and lows. Picture includes.
>
> The other indicator is an o/s indicator which appears to be an RSI type
> indicator as a histogram rotating about the 0 line.
>
> thanks
>
> Gordon
>