I've currently got 3 keypads on my Comfort system, installed for about 6-9 months now. Last week at 4am, one of the keypads started making a loud cracking ...
Paul If it is not a wiring problem, then the problem may be the keypad. Perhpas a dry solder joint which does not show up in testing. chiu ... ===== Cytech...
Yeah! Well done Chiu. I'm sure our messages in this Yahoo group were indeed highly relentless! ;-) We are always complaining and making impossible demands!...
For a domestic usage having to select a mailbox is over the top. I look forward to the new software. steve rooks ... were ... solution. ... The ... mailbox, ...
Hello, I was wondering, is it possible to relay the infrared commands recceived by a IRR01/RIO to a output on the RIO ? Maybe an option in comfigurator to...
Thanks Chiu, Looks like that may be the case - swapped it out with a spare keypad I've yet to install elsewhere and the crackling seems to have gone away. I'll...
i assume i need to power off the mains supply and disconnect the battery first? just want to check (as i think that the external sirens will all sound if i do...
This is not possible, as the RIO only recognises a set of IR codes and encodes it in the ifr format. The RIO is not able to encode all possible IR signals, it ...
I will use an ISDN System so I used the Genius 1.14 ISDN30 Digital Phone System Doorphone Configuration guidelines. I would like to add to the above the...
Please advise how can I activate the "Doorbell" announcement through the keypads when the doorphone is pressed. This functionality disappeared after upgrading...
Yes, you need to power off and disconnect the battery before you change the U1 chip. If you have a self-actuated siren with internal battery, then you should ...
This feature was removed after many requests, as it was felt that it was an annoyance. You can get this back by recording a reminder message "Doorbell", then...
Chiu, since i'm planning to upgrade to this new functionality and want to place an order for some UCM / UCM firmware / Outside firmware, can you give me an...
I know i'm a bit late with comments in this thread - I've been away for a while. I think this is a really good idea, I share the opinion that when the house is...
Frans, nothing to do with comfort I know, but I use the remote control extender products from labgear (www.labgear.co.uk) to control my central satellite ...
Thats a tough one. I assume the record and dialout flags you refer to are user flags. Normally dialout for door station will only occur in Away or Vacation...
Frans The "beta" or test version will be released next week. chiu ... ===== Cytech Technology Pte Ltd 55 Ubi Ave 1 #04-06, Singapore 408935 Tel (65) 6846 9701...
I guess the consensus is that this is more desirable than not, then chiu ... ===== Cytech Technology Pte Ltd 55 Ubi Ave 1 #04-06, Singapore 408935 Tel (65)...
Hi if i change the above chip from 1.115 to 1.169 and get the UCM that supports the voice upgrade, can i then update the voice without having to return the...
I need advice on connecting up an open collector type PIR to a comfort zone. The sensor I have has a 12v and ground input and provides an open collector to 0v,...
Hi I've want to install two Hochiki Smoke Sensors into my system. But I can't workout the wiring that gives me a working system. Can anyone give me details of...
Just connect the open collector output to a zone and the ground of the PIR to the COM common of the zone. Program the zone as Normally Open Switch. That should...
We had 1 user report that he was unable to get the voice download to work, but that was later found to be due to a computer issue which has been solved. All...
The resistance which the open-collector will have to pull down is about 7.5K ohms. The current can be calculated as 5V / 7.5 K ohms, ie less than 1 milliamp,...
... Not worried, just curious. Thanks for the help. S. ___________________________________________________________________________ The information contained...
Thanks Chiu, Will this version also include the combined Away/Vacation mode? ... From: L Y Chiu To: comfort-technical@yahoogroups.com Sent: Tuesday, January...
Hello all, has anyone successfully managed to learn the IR signals of Bang & Olufsen equipment and get Comfort to control these devices? Either using a Pronto,...
