I am new to this home automation field, but I have good knowledge in Building automation system ,can any of you give me some detailed documents how to do home...
5856
Bala Ganapathy
megabala@...
May 3, 2005 12:40 am
Hai Ramesh, Just go to the http://www.cytech-technology.com.You will have all the information and the manuals, help you to design, install and commission home...
Hi, Could someone please assist me with my query. I have the Comfort Ultra board with one Lem, 2 RIO modules and 4 scene switches. The RIO and scene switches...
There is also a new document in the Manuals section "How to Configure a Comfort System" which may have some helpful information You can also sign up to...
Does anybody know what happened about the e-mail survey that was sent out a while back! Regards Andrew Ellis Household Automation - The synergy of technology...
Reuben The possibilites are: 1 - there is a short on the KA/KB which disables the communications 2 - One of the modules is damaged causing the KA/KB to be...
Hi Chiu, I tried connecting the white 4 pin comms cable from Ultra directly to my first RIO (ie bypassing the UCM) and I still get the D1 flashing on all RIOs....
Hi, Over the weekend I changed the wiring from my master BT socket to the Comfort panel. Everything seemed to work fine till this morning. One test I didnt do...
Right I have found the problem, any advise on the rectification. I have 4 sky boxs, 1 tivo and a cordless phone coming off the phone line after comfort. When I...
5864
rid@...
May 3, 2005 5:46 pm
sounds like the REN count is exceeded (normally 4) what have you changed EXACTLY Rid ... From: "davidalucas" <davidlucas@...> To:...
Yes agree with Rid especially as Comfort works fine with just 1 skybox and tivo disconnected – (I assume therefore that comfort is still working fine with 3...
The doorphone works fine. When we get a visitor, the phones ring. If we are away, the mobile rings. If we ignore the door (aren't we rude!) the phones...
Hi Chiu, I made some progress last night. It seems that the 4 pin comms from the Comfort panel to the RIO is faulty. I used the KA/KB and voltage from the...
Reuben check that the LEDs D9 and D10 on the UCM are blinking rapidly. This shows that the UCM is receiving communications and is replying to the polls from...
Chiu, There is no activity on the UCM otherthan the green ready led. If I reset the UCM, I get a few red leds and then the green ready status. With regards to...
The absence of activity on the D9 and D10 leds shows that the UCM is not connected to the Rs485 bus and cannot see the data. This may be related tp the problem...
Nick Our current firmware does not do that. ie, Press the doorbell wait for the ringing to stop Enter the user code on the keypad and listen to the menu. The...
I have download one PDF (“How To Configure a Comfort System”) from Cytech webpage and in this PDF I have discovered reference to the following product KT01...
Hi Luis, KT01 is a touchscreen that allows the monitoring of zones and alarms, arming and disarming, control of lights and appliances. It also allows the...
Hi, Do you have a web link to this touchscreen. I could not find any on the web. Thanks ... Hi Luis, KT01 is a touchscreen that allows the monitoring of zones...
Hi, No activity on the D9 and D10 on the UCM. I give up. I am sending the main board and UCM for repairs. Thanks ... is not ... related tp the ... than to...
Reuben We should have a draft manual and other information by next week. We have not announced the product yet chiu ... Cytech Technology Pte Ltd 55 Ubi Ave 1...
Hi Everyone, I have a couple of problems that maybe some of you may be able to answer. 1. i have a problem where i cant get the comfort answer phone system...
Hi Everyone, i have a problem with an answer phone that is cutting off the messages too early. Rid told me to change some parameters they were: - voice...
5879
rid@...
May 5, 2005 1:50 pm
Ion Under telecoms.answering change the Record Time Cheers Rid ... From: <ionsmith@...> To: <comfort-technical@yahoogroups.com> Sent: Thursday, May...
In answer to your first question, action 135 for the Door Station asks to record a message if no one has answered the door in the programmed time in this case...
... Chiu, I just tried this: Press the doorbell (phones ring) Open the door (ringing stops) Open the garage door ("garage door open" audible through the ...
Just tried upgrading my old 2002 version to the latest, done the older install again as per instructions. I have some current sensors connected to my Comfort...
Arghhhhh...... not really at this stage... Is this consistent and repeatable? If so, can you turn the debug level up to 2, make it happen, and then send me...
