Hi Chiu Due to the mixture of wires Comfort was not answering only in Away mode. After fixing this, now everything is OK I also use RJ11 for internal line...
Why always by uploading the ccl file 1.6.10 informing me that I try to upload with different vocabulary. I use UK Residential both in Ccomf 1.6.10 settings and...
Hi I am using the Control menu to open and close garage door. In order to know the status of door I am using the gate connector. It works fine to open and...
Hi, Below is quoted from the Comfigurator help, under Control Menu. If a feedback zone is programmed, the Control menu will announce the state of the appliance...
If you have a UCM/Ethernet which is connected to your wireless network through a wireless access point, you should be able to write a batch file containing the...
Also, what type of zone is the sensor? I use a similar setup for my gate but mine is set to a perimiter zone so that anounce zone works on the keypads. It is a...
Hi I installed outside sensors. It used for outside lights activation via Zone/Input On and Off responses. Also I have idea to make add also some inside lights...
Hi It is EntryDor Zone type. Sensor is simple gate contact. I try to avoid 1, because Garage door in on 1 in control menu and then I can open it by double...
Hi, I wonder is Nigel and co planning any more training in the future. I fell I could do with a course now as I have not touched the system for over a year ...
Hi, I want to use Windows XP Mediacenter to control Comfort. Does anyone know of an add on that will work with Comfort outputs (relays not X10 devices) ? ...
Hi, Take a look at message 5681 for full instructions from Chris on how to do this or do a seach on 'Serial talk' Thanks Reuben ... network through ... ...
Have you tested the sensor is working properly? (wizcomfort is good for this) I'm not sure what you mean about double clicking but the open/close phrases need...
Mindi, the best way to do automatic lights is to use three responses and a timer. Response 1 is used on the on response for the zone, it Checks time, light...
6720
rid
rid@...
Sep 2, 2005 11:39 am
Reuben We have MCE 2005 working with an interface to X10, Comfort, and other external hardware. You mention Comfort outputs, but do you mean inputs, or do you...
... I hope so. Sometimes I feel that I need a refresher course :) chiu Cytech Technology Pte Ltd 55 Ubi Ave 1 #07-04, Singapore 408935 Tel (65) 6846 9701 Fax...
There are some changes to the vocabulary settings for the new generation Comfort which has not been sorted out on the pre-beta yet. Nothing to worry about ... ...
Rid Any other info on this interface? How does it work and what does it do? Is there a demo? chiu ... Cytech Technology Pte Ltd 55 Ubi Ave 1 #07-04, Singapore...
Rid, My Comfort outputs are connected to relays for lighting, sprinklers and others. Can this be handled with the MCE interface ? Can you also query the status...
I know some on the list have had problems connecting and controlling Comfort through DECT phones. I also have problems whereby I can connect to Comfort by...
I suspect that Andy or Chui will point you towards any of the Banitone range. However I cannot suggest a specific model we have not had any trouble with this...
Can someone suggest the best way of allowing a door phone and camera to connect to a 3G phone. I am after a seamless approach – when you receive a phone cal...
I've got a Panasonic KX-TCD560E as my base station. There are a variety of BT second handsets. All work fine for me. When I was having phone troubles reversing...
Nope, we dont have Banitones here in Singapore. I have been trying to find a DECT phone which has this problem but have been unable to, as several DECT phones...
I have a Binatone MD75 bast station with two binatone Micro DECT handsets and they work well. I get the wrong code message if I preset dial the code i.e...
Hi I am using Siemens DECT. There is no problem to get * working just push star and Dial BR Mindaugas ... to find a ... several DECT ... Philips DECT ... key, ...
In response to this thread, we have re-instated the Which DECT? page on the UK Comfort Website: http://www.home-control.co.uk/support/ click - Which DECT? ...
Hi Sensor is OK. I am also using it for security and lights control. I had a situation when push button "1" twice on my phone and got door opened but I just...
Hi In Engineer programing guide I found that "From firmware 4.182, Vacation Mode has been combined with Away Mode. There is no separate Vacation Mode, but the ...
One of the options for Zone Types in the Zones/Inputs screen is "0 Not Used" according to the Comfigurator manual and online help but I can't find this option...
I am having problems with the connections on a Cequra 2 sounder connected to a Comfort system. I have used the connections on the Home- Control site but when...
