Dear All, Just to let you know we are trading as usual again from Monday 2nd October. We have new stock in and will be working on fulfilling outstanding orders...
84
Andrew Roberts
andrew@...
Oct 2, 2000 10:40 am
We have been informed today by our suppliers that they have still not received their stock from China (via Netherlands) yet but expect to 'hear' when it will...
85
Andrew Roberts
andrew@...
Oct 2, 2000 9:15 pm
CS-Xpress Version 3.13 for UCM01 is now available for download: 2.2mb http://www.comfort.org.uk/technical/index_beta.html (password required) It has quite a...
86
Ian Clarke
ian.clarke@...
Oct 10, 2000 6:52 pm
Hello All, I seemed to have killed my comfort system. Version M4.58. Two keypads. One door phone. One 16 Input Local Expansion Module. RS232 Interface. The...
87
Andrew Roberts
andrew@...
Oct 10, 2000 7:05 pm
Ian, Just a quick thing to try, sounds like a comms failure on KA,KB, have you still got the old RS232 module connected, this can cause confusion on the comms...
88
L Y Chiu
chiu@...
Oct 11, 2000 1:27 am
Ian Your description of the symptoms are very detailed and helps to pinpoint the problem I will try to answer your questions below ... This means that the...
89
Ian Clarke
ian.clarke@...
Oct 11, 2000 1:01 pm
Hello Andrew and Chiu, thankyou for the very quick response. I have spoken with my installer, we will try a new board as the U7 chip is not socket mounted. In...
90
L.Y. Chiu
chiu@...
Oct 11, 2000 1:04 pm
It is a good idea to have a new board handy, but a further explanation - when we released the rev E pcb with the U7 soldered in, we also made a Voice...
91
Andrew Roberts
andrew@...
Oct 13, 2000 10:01 am
Dear Comfort egroup Member, We have now added some new products to the Comfort website: Electronic Locks and Keypads and Proximity (see Access Link) Comfort...
92
L Y Chiu
chiu@...
Oct 20, 2000 11:28 am
Nigel When you pressed a * key in the middle of your greeting message, you are telling Comfort that you are signing in instead of leaving a message. This will ...
93
L.Y. Chiu
chiu@...
Oct 24, 2000 1:39 pm
Nigel I called to your home number and heard the beep (1 out of 3 times). It heard a * DTMF tone in your greeting message and produced the beep tone, stopping...
94
Nigel Orr
nigel@...
Oct 25, 2000 11:43 am
... I am not sure how it could have happened, I left that outgoing message quite a while ago, and I couldn't hear a tone, but I have now changed the message,...
95
L.Y. Chiu
chiu@...
Oct 26, 2000 4:00 am
The Lutron Grafik Eye is a well known, (but expensive) dimming system (see www.lutron.com). I think there was some discussion of it on the UKHA group. It is...
96
Richard leslie
r.leslie@...
Oct 26, 2000 1:54 pm
Hi Chiu, On my project , to install Lutron dimmers ,http://www.lutron.com/grafikeye/grx_acc.html has already been suggested , and rejected ( I'm in favor of...
97
Dan Hoehnen
dhoehnen@...
Oct 26, 2000 2:08 pm
Richard, Once you have the Comfort Web InterfACE (CWI), you will have the ability for HV and Comfort to communicate. The heart of CWI is a program called ACE,...
98
L Y Chiu
chiu@...
Oct 26, 2000 2:14 pm
Richard I don't have a Homevision, but many others on the eGroups have and shiould be able to offer you better advice. I know that HV has Rs232 interface so it...
99
Kevin Hawkins
Kevin@...
Oct 31, 2000 12:39 am
Hi Richard, I have used HomeVision in conjunction with Comfort in an installation and I also use it at home. Unfortunately, despite campaigning for the UCM...
100
L Y Chiu
chiu@...
Oct 31, 2000 2:13 am
We do try to incorporate as many suggestions as we can from our users, but we have constraints on the number of things we can do, especially for changes that ...
101
Frans Rampen
Frans@...
Nov 1, 2000 2:01 pm
Hello dear comfort users, I have a question about the recording time of the answering machine. Since I have upgraded my system with the CWI (and thus also the ...
102
L.Y. Chiu
chiu@...
Nov 1, 2000 2:11 pm
In this version, we removed the individual recording time settings for the different message types. Greeting message, incoming messages, Alarm Messages, User...
103
adrian.lucas@...
Nov 1, 2000 2:41 pm
Thanks Adrian, yes it is now available after firmware version M4.83, it is listed as location 1847. (Power Fail Restore Response) Andrew CHC After the recent...
104
Andrew Roberts
andrew@...
Nov 1, 2000 7:33 pm
If you have UCM01, please visit the following page and download the latest version of Comfort programming software. Download file is in zip format and is about...
105
Andrew Roberts
andrew@...
Nov 5, 2000 3:24 pm
X10 Products and UCM are now in stock! If you have been waiting for our X10 product stocks to get back to normal and for the UCM (RS232 Module) to arrive in...
106
comfort@...
Nov 7, 2000 1:41 pm
I was searching through the worksheets for somewhere I could program a response code to be activated upon successful arming, e.g. to switch off all downstairs...
107
L.Y. Chiu
chiu@...
Nov 7, 2000 1:47 pm
You have missed Table 30 - Security Mode Responses. You can program a Response to be activated when the system is armed to Away,Night, Day,or disarmed to Off ...
108
comfort@...
Nov 7, 2000 10:47 pm
Andrew, You will notice that there are already some responses in the Security Mode Responses positions, this is intentional, it is best to add your new...
109
Andrew Roberts
andrew@...
Nov 10, 2000 9:46 am
Just to let you know, the Comfort website at www.comfort.org.uk is temporarily down while domains are being shifted and will be up and running again later...
110
Andrew Roberts
andrew@...
Nov 10, 2000 10:43 am
Dear All, The Comfort website is now back on-line: http://www.comfort.org.uk However, the following domains are being transferred and may not work for a few...
111
John Parker
john@...
Nov 13, 2000 7:42 pm
Hi all I'm having a problem with the doorphone on my Comfort system. Firmware is "Outside 4.93". There is a PIR+Camera by the door in question. The Camera...
112
L Y Chiu
chiu@...
Nov 14, 2000 1:16 am
Do you mean that the PIR is detecting movement when the doorbell is pressed? When the announcement is being made on the keypads, and the doorbell is pressed,...
