HI DENNIS, I'M VERY INTERESTED IN ONE OF THOSE HEADSTOCKS, LET ME KNOW WHAT IT WOULD TAKE TO LIBERATE ONE OF THEM FROM YOU. MICHAEL DOUGHERTY ... place and I...
Hi Michael OK what all do you need. Now I will tell you that the gear shifters were fit to a particular head stock and dont interchange well. Ask me how I...
Can anyone made these for a Dalton B-4. I have on for my South Bend and use it all the time See Ebay Item South Bend 9" Light 10" Lathe Carriage Stop Trav...
For Sale: "Dalton 6", type B-4, lot 5 model, serial # 5-N-494. Complete in every way with Dalton stand and chip tray. Beautiful working condition. Turk...
Hi Ron and Mike OK I have a number of lathes here that are only good for parts. Let me know just what all you need. If you wont a complete head stock or just...
As I have quite a few of these parts sold, I will be disassembling my machine and parting it out. You were very helpful, and informative. I do greatly...
So I've been operating under the assumption that the tapers on my lathe are Morse... The tailstock takes and holds Morse #2's very nicely, plus the lathe came...
I have had to use my number 3 morris reamer on most of the spindles I have worked on. Seams the spindles are soft enough that either they are burred up or...
I have a thoroughly_exposed_to_the_elements Dalton lathe for sale, circa. 1914. It's well rusted up. The tailstock managed to escape encrustation/rustation,...
ok, give me a day or 2. ... ____________________________________________________________________________________Sick sense of humor? Visit Yahoo! TV's Comedy...
Hi Guys(and gals, I just recently purchased a Dalton lathe at a estate sale and in doing research found the site Oldarn, and Andy from there sent me here to...
Welcome aboard! I have a Southbend countershaft for my Dalton... Works just fine. There's a picture of it before I got it up and running in the photo's ...
Thanks Tim, you just opened another door for me. I guess I have to keep searching places like Englishtown for the countershaft....there is a guy in ...
This has been in my garage probably since my great-grandpa lived there. I don't know anything about old lathes, and thought one of you Dalton enthusiasts could...
Cari, Just a few suggestions. 1. There may be information about your lathe on this website http://www.lathes.co.uk/. 2. If you want to sell it, eBay is one...
Hello all, I have a Mitutoyo dial caliper that I just took apart to clean. Seems there was a spring hiding in there. It looks like it goes in between the two...
There is a B-6 currently listed on Ebay. It has the cast iron stand and possibly a Dalton overhead drive. Not sure the drive is listed as part of the...
Can aluminum be used for headstock bushings if there is enough oil ? My bronze bushings were way too far gone and now there is a delrin bushing in their place...
Hi All Well now we have number six or seven lot six 8 1/2 inch swing Daltons now known of. This size Dalton was built between 1915 and 1929. In the small...
I have a Dalton Lot B4 #3092 c. 1920-1923 for sale in San Diego. I posted a photo album under the name of "John Brody's Dalton". I inherited the lathe and the...
I need a picture of the milling arbor used on the Dalton Combination Machine. Mine did not come with one and I'm not sure what type it takes, or how it looks....
PK, You have a combo machine? I thought that I had the only one. I'll try to get a picture of the arbor tomorrow and send it too you. Where are you? Where did...
Hi PK Turk here If you go to Tony's site in England you will find some pictures I took of a combo machine that was here in Oregon a few years ago. Tony's site...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
