Hi Ron your Dalton website is having problems with the search engines google and yahoo are claim the site "may harm your computer" . is it safe to visit? ...
Hi Bruce Yahoo say that!!!. Its a yahoo site using yahoo applications! 100% conttrolled by yahoo! Anyone out there able to help? I'll try to contact yahoo Ron ...
Morning Brice I checked it out using the search engines. Are you talkein about the Dalton Lathe Yahoo groups website or the oldarn.com/dalton site that is...
About six months ago I started having the same issues with not only Andy Sargents site but also eBay. If you are using Norton's and are on auto updates you...
whoops sorry Ron , any way Andys dalton site is ok by msn but yahoo's and google search engines are warning aginst using . thanks Brice ... From: "Ron Peeler"...
Hello All, I need a bit of help when it comes to the threading gears. I have never used a lathe that requires gear swapping before. I once worked at a tool and...
Hi Dan As to the head stock on your Dalton you should be using a good grade of spindle oil in the oil cups on the bearings. The cone pulley has a set screw...
Thank you, Dennis. I have plenty of gears. The original owner had them divided into 2 stacks. All of my gears have solid centers. I am not sure what gears need...
Hi Dan There is no lathe manual per say but if you can get a copy of How To Run A Lathe by South Bend it will go a long way in teaching you what you need to...
Dear Dennis, Thank you ever so much. I have the How To Run a Lathe from Lindsay Publications, but I did not know what was the gear location on the Dalton. The...
You can get an 18 tooth? I have a 20! I think I may have a slighly slower speed than Denny says you can get I have a 96 and 20 combination gear on the banjo...
hi Dennis I would like to buy a chasing dial if any are available. please let me know your prefered mode of payment yours Larry ... From: Dennis Turk...
Hi Larry I have two completed ones boxed and ready to ship. Just send a personal check for $85 as that will cover shipping also. Send it to Dennis Turk PO...
Hi Larry Got your check on Friday and I just came back from the post office and your threading dial is on the way to you. Thanks. Dennis ... From: l leonard ...
Hi guys Just a post to let you know that Jeff Beck Tools4cheap is now stocking chuck back plates for your 1 7/8 -8 spindles. This spindle is used on the B-6...
Turk ! how are you coming on the backing plate for the Dalton six type 4-B are you going to make them? ... From: Dennis Turk<mailto:dennis.turk2@...> ...
Hi Butch I am confused here Butch. I thought you were the guy down in Florida with the prototype Dalton that had the larger spindle. Correct me if I am wrong....
no iam down here in tucson az. ... From: Dennis Turk<mailto:dennis.turk2@...> To: daltonlathes@yahoogroups.com<mailto:daltonlathes@yahoogroups.com> ...
OK we must have another Butch then"-))))) I just emailed my operations manager to see if we had time in the shop to get some G jobs done. Things are a little...
Denny wrote One of these ended up undersize for one of the guys. I sent him my 1 1/4 - 12 tap and he ran it though the face plate and he said it fit perfect. ...
Hi Butch On the little Dalton they came with a 4 inch three jaw and a 5 inch four jaw. One of the things you have to watch is not getting a chuck that is to...
HI Dennis well it sounds like I don't want to even work on this lathie at if someone wanted it local,I would sell it to them for what I have in it! and buy a...
Hi Dalton gang I have been working on the back plate problem for you guys with the small Daltons. I am having my engineer draw up a six in chuck back plate...
Can some one give me a list of the gears that makes a complete set for a Dalton Six model B-4 lot 5, Also does anybody have any spare gears for sale if I am...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
