Ignoring push rods, what about a simple inboard shocks system using rocker arms? Cheap to do and reduces unsprung weight - that wouldn't be a problem. On the...
38945
James Hughes
jnahughes
May 1, 2002 7:49 am
PS.Just looked at the ADR Site - Damn, that one looks good as well. Choices choices. James ... From: James Hughes [mailto:james.hughes@...] Sent: 01 May...
38946
Peter Sutton
courier552000
May 1, 2002 8:00 am
Hi There, To all those who answered re AVG virus ,thank you . My wife has read your replies and will give it favourable consideration. Regards Peter....
38947
Daren...
daren57
May 1, 2002 11:08 am
ive just had an lpg conversion done on my mazda 323, its excelent i get
35mpg at 26p per litre(cheapest in the country(stoke)) which == about 100mpg
compared...
38948
locost@yahoogroups.com
May 1, 2002 12:48 pm
This file contains the posting guidelines, or "house rules" for the Locost mailing list. It is auto-posted once a month to the list, and is sent to new...
38949
peetff
May 1, 2002 12:56 pm
The two round pins are the essential part. Don't lose them and also rememberot fit the pads with the metal backing to the caliper piston side, they don't wear...
38950
Ken Howatson
howatsonk
May 1, 2002 1:03 pm
We sell fuel tanks and fiberglass bucket seats. Ken MCC7...
38951
Daren...
daren57
May 1, 2002 1:05 pm
but isnt it westfield who are wlso doing one like that too.
-----Original Message-----
From: peetff [mailto:paffrench@...]
Sent: 01 May 2002 13:56
To:...
38952
Alan
pne_alan
May 1, 2002 1:14 pm
The trouble is it looks OK, but the website is useless. If there was any less info. the site wouldn't even exist! Alan B Pete wrote (snipped)...
38953
James Hughes
jnahughes
May 1, 2002 1:52 pm
At least there is a questionnaire.... I see what you mean - not a lot of information - not even any photos of development chassis, which would be nice... James...
38954
bryncastell
May 1, 2002 2:49 pm
I can take a photo of my calipers with the springy thingy attached and post it to the files area if that helps. Depends if you're in a hurry though cos I'll...
38955
James Hughes
jnahughes
May 1, 2002 2:58 pm
No hurry - already spent 20minutes trying to figure it out - a few more days won't hurt!!! TIA James ... From: bryncastell [mailto:russ@...] ...
38956
tasmod
May 1, 2002 3:00 pm
Hi all, Called at Martins today to look at the new prototype. It looks very nice in blue and silver. He is busy trying to finish it for Stoneleigh. Martin...
38957
tasmod
May 1, 2002 3:05 pm
Don, On my visit to MK today he told me about slight problems he had. He cannot access the list anymore and asked me to contact you via list about an uncleared...
38958
Daren...
daren57
May 1, 2002 3:53 pm
HE SAID DONT COME BACK UNLESS YOU HAVE CASH!!!!!!
Daren...
Sorry, could not resist.
-----Original Message-----
From: tasmod [mailto:rlane@...]...
38959
Steve Webster
yimkin999
May 1, 2002 4:28 pm
Hi All Could someone tell me for sure what model the "bike engined project" car is on MK's site. IMO it doesn't look wide (or tall) enough to be the Indy. ...
38960
David Jenkins
d_w_jenkins
May 1, 2002 5:28 pm
... From: "peetff" <paffrench@...> ... <big grin> David ... Outgoing mail is certified Virus Free. Checked by AVG anti-virus system...
38961
Richard Markie
richard@...
May 1, 2002 6:31 pm
Anyone know where I can get hold of some twin 40 webers & manifold?? also am looking for a westy manual to have a look through if anyone is finished with one??...
38962
Chris Shaw
s2racing
May 1, 2002 6:40 pm
Hi All Long time since I have posted, but anyway.... Due to a slight change in plans for racing, I am now thinking of racing in the road going bike engined...
38963
plastictankman
May 1, 2002 9:24 pm
Hi Steve The car in question is a Honda Fireblade engined, De-Dion axled car. Basically it's a wide tracked Locost but using the Ford Sierra as a donor and not...
38964
Michael Rankin
mikejrankin
May 2, 2002 3:24 am
Well I just happen to know the father of the bloke from Motec (engine management unit that the car runs) who was also present that day to tune & get the best...
38965
fitzgerald_j
May 2, 2002 7:02 am
Take a look at the following group/site http://groups.yahoo.com/group/rotus7/ ... trans...
38966
bryncastell
May 2, 2002 7:51 am
James I've posted a piccy of the calliper to the Photos area (picture no. 33). It clearly shows the anti-rattle spring in place. Hope this helps, Russ ... a ...
38967
James Hughes
jnahughes
May 2, 2002 8:02 am
Thanks Russ, that appears to be the one combination I didn't try - buggered if I know why I didn't. James ... From: bryncastell...
38968
Peter Sutton
courier552000
May 2, 2002 8:23 am
Hi Daren, As a fervent fan of LPG I have been using it for 18 years. Two of my vans have dedicated LPG systems, in fact, it is now very rare to see a duel fuel...
38969
Roebuck, Alex
maroebuck
May 2, 2002 9:07 am
MK annoy me a little bit with this. I was concerned about the wider track and extra height of the Indy kit so Martin said, "come and drive my demonstrator,...
38970
peetff
May 2, 2002 9:11 am
... know why ... Because the brake disk will wear it out, probably. The spring will make some nice sparks for a few miles as it is on top of the brake disk....
38971
d_w_jenkins
May 2, 2002 10:22 am
... top ... I was wondering about that - I presumed that the spring wasn't in contact with the disk, but hovering a little way above. Your point about the...
38972
James Hughes
jnahughes
May 2, 2002 10:41 am
Ah, but if I have the spring, I will always be wondering whether it makes a difference..... ... From: d_w_jenkins [mailto:d.w.jenkins@...] Sent: 02 May...
38973
bryncastell
May 2, 2002 11:01 am
It isn't tensioned against the disk. That would be daft. Russ ... I ... top ... it...
