This was posted on the Se7ens list today http://www.gtscougar.freeserve.co.uk/F17.htm Specs sound impressive Esko [Non-text portions of this message have been...
Hi! Did anyone try to SVA his/hers Locost with left hand side steering? I would like to do so, because I would use my 7 mainly outside UK. Any lead / help...
49930
locost@yahoogroups.com
May 2, 2005 4:32 am
This file contains the posting guidelines, or "house rules" for the Locost mailing list. It is auto-posted once a month to the list, and is sent to new...
I believe it was Darren from GTS who did quite a bit of work on the new Caterham aero package (indirectly - its a long story which cannot be repeated in...
I am looking for some seats for my locost and would like to know what others have used in a standard book chassis? I have looked at the roadster 7 which seems...
I am building a locost using a toyota 2wd pickup with the 22R engine and an automatic transmission. All is going well but the seats did give me a problem....
Hi Gary, Did you anneal the channel where it needs to bend? This makes a huge difference. To anneal, smear some ordinary soap on the channel then heat with a ...
... Gary It told me a couple tries to get the windshield frame too. I suggest you try annealing the aluminum channel first, shim the corners on the both of the...
The Third Annual Southwest Se7ens Festival Please send in your entry to Bernie Long by May 10th!! What could be more fun than being around great sports cars, a...
haha, a bit late to respond on this one! but i think mine are only 4mm, will i be able to tap into the hub? ... some 8mm ... caboodle ... for the ... of this ...
Only a year and 4 months late... Get 8mm. You wouldn't want to drill holes in the hub I don't think - not where there are some there already. 8mm threaded rod...
Hi, Actually it's no problem at all... http://www.gtmv6.com and http://www.elcova.be (passions/cars) have had 2 Libras and several 7-type cars SVAd as LHD...
Hi Has anyone got any experiences with these instruments? Good, bad, or indifferent? I am looking at a Pricol speedo and tacho for the locost. They seem to ...
Hi Can anyone point me in the right direction of which cars to look at to find a right angle speedo adapter to fit a T50 box? thanks Patrick Neal NZ -- No...
no mine are definately not 8mm, they are about 4mm, which seems a bit weird! and they are very shallow too, about 4-5mm, im not sure id like to trust them to...
just for those that didnt read my last post http://www.oldcarstuff.co.uk/ddt57/ pod2.mov has my last santa pod visit, you will see me guide it to the finish ...
they ight be 6mm, i was just confused why lolocost have chosen to use such big holes on their bracket ... <http://www.oldcarstuff.co.uk/ddt57/> ... - not ... ...
Right, don't laugh. I intend to put a diesel in my locost. (hey if they're good enough for Jenson Button they're good enough for me!) Only thing being, and...
The 1.6/1.8 Ford Diesel engine is an OHC unit and is quite tall and VERY heavy. I do seem to recall that the block is based on the Kent though so there's a...
... It has been discussed before so it's not a new idea (see the thread "Deisel Loccost? <http://finance.groups.yahoo.com/group/locost/message/23470>"). The ...
G'day Just seen the Dax rush MC on their web site and a picture in a kit car mag. The MC has some very nice looking round tail light units, not the 3 round...
Does anybody thought of screwing the suspention brakets to the chassis? I see it would be safe and give some posibility of change the bracket and adjust the...
I bolted only the lower A frame brackets to the chassis. The top brackets are welded in place. In fact I used all front suspension parts from Triumph Heralds....
I would have thought the upper brackets would be better off adjustable. This way you have adjustment of the roll centre. The lower arms should generally be...
Hi all: I am building a 4-4-2 size 7. What size(height) windshield are most everyone using? Brooklands won't wash in Wisconsin. after seeing the car for so...
LAST CALL…... There is still time to send in your entry for the Southwest Se7ens Festival! Don't miss the sights, sounds, and the excitement of the Third ...
