This file contains the posting guidelines, or "house rules" for the Locost mailing list. It is auto-posted once a month to the list, and is sent to new...
locost@yahoogroups.com
Oct 1, 2005 6:37 pm
50426
I think the ancient Saabs used them., say 1956 0r so 2-cycle 3-bangers unexplainable55 <unexplainable55@...> wrote:I was wondering if some of the larger...
I nead to intersect a 44.5mm tube with a flat surface. does anyone knows about some program to design it? winmiter doesn't design intersection with flats. ...
Amadeu: Try www.ezpipe.com It makes a paper wrap around of the required cut. Ed ... From: amadeu pires To: locost@yahoogroups.com Sent: Thursday, October 06,...
Can somebody tell me what the design ride heights are for the locost using the cortina spindles? Actually, the height from ground to the the upper a-arm...
My bad. I meant the height from ground using the escort spindles. spud091 <spudw@...> wrote:Can somebody tell me what the design ride heights are for...
ACAD - if you have access to it, and know how to use 3-D, then it is perfect. Darren Camilleri ... From: locost@yahoogroups.com [mailto:locost@yahoogroups.com]...
There is a free program called tubemiter that can be used to print paper templates for intersecting round tubes. I don't know whether it can be used to...
Amadeu, Perhaps I am missing something here, if you want to join a round tube to a flat plate, cut the tube to the length that you want and weld. If there is ...
Amadeu: Go to ezpipes web site and look for the free sample trial. www.ezpipe.com/samples.htm ... From: amadeu pires To: locost@yahoogroups.com Sent: Friday,...
thks to all... - Ed, ezpipe freesamples can´t do what I want - Russel, winmiter can do it with the 2nd tube big enough. it draws the line, simply the printer...
So, take a piece of paper and a protractor. Draw a line along one side of the paper to represent a side view of the plate you will be welding to, then draw a ...
That does make a difference, cut the tube at 81 degrees and you are there. Esko ... From: "amadeu pires" <vdesign@...> To: <locost@yahoogroups.com> Sent:...
I've been using tubemitre and had no problems with large to small pipes but I winmitre kept crashing my PC :-( I might write a program to do it (I'm a...
I'm not understanding this problem - if it is a pipe running into a flat surface at an included angle of 81 degrees, cut the pipe at 81 degrees. If you have a...
Hi Ben what do you want to know I have the lotus seven book that has the story of it's development some road tests (of the S1 America) . I can scan and send to...
Hi all, sorry for the newbie questions. I am JUST STARTING my locost project. First puchase yesterday: 2005 Ford Focus Duratec 2.0l. I want to jump start the...
Hello, sorry upfront for the newbie questions... I have just started looking at building a locost 7. First acquired part is a 2005 ford focus duratec 2.0l...
If you just need to get a good mark on the tube rather than print templates here is a method that is pretty easy. 1. Start with a tube a few inched longer than...
Russell, Do that program, at least that intersection of tubes with flats. It will be very usefull. More: I found that litlle program that David Jenkins said...
... But seriously, it'd be neat if it would generate .dxf files so it would run it on a cnc plasmacutter--it'd be a good excuse to make myself a y-axis tubing ...
Hi Scot If you are in the UK there are lots of choices for good value kits check out the "Locostbuilders UK " site http://www.locostbuilders.co.uk/ lots of...
Thanks Iain...problem is i am in california...I think the shipping of the kit from UK would kill my budget!!! ;-) Know of any good, AND relatively inexpensive...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
