Here is a link for some wheels for those that have more money than ...... http://customwheel.com/custom_wheels/product_info.php/products_id/1687 Esko [Non-text...
I would like mine as boobs :o) One on each wheel :-D Eskoa <eskoa@...> wrote: Here is a link for some wheels for those that have more money than .........
James, The leaking head gasket may have allowed combustion pressure to leak into the oil drain cavities therefore pressurising the entire engine crankcase. If...
What I have done (but as yet untested) is.. replaced head gasket. Added a baffle to the fuel pump blanking plate Scrap the recycle of breather oil to the...
G'day We are building a locost at school and have a sierra 5 spd and ford 1300 kent engine. We were going to use the Pinto, but I'd rather have less power if...
You need a new clutch plate and clutch cover of the correct diameter to match the splines. It's a standard conversion - check the net for the part numbers...
Sorry, that reads wrong. The clutch plate spline must match the gbox, and the clutch/cover diameter must match the flywheel. 71/2" IIRC, but don't quote me. ...
If you are interested, I have a fully dimentioned works drawing of the 2737E (crossflow) engine. Which might take some of the guess workd out of installation,...
Hi Pete, I am interested... :) If you don't mind can you send to my gmail account: caglar.ergun at gmail dot com All the best, Caglar ... From: Peter Ward To:...
Peter, If that is a CAD file, would you please send me a copy. eskoa@... Thanks in advance, Esko ... From: Peter Ward To: locost@yahoogroups.com Sent:...
If Peter is willing, perhaps he could post the files (if they are files!) to the files section for everyone to view. I would certainly be interested if these...
I would be interested two, either way he would like to share them. Thanks! Richard rle022347@... ... From: locost@yahoogroups.com Date: 06/19/06 08:42:17...
I am new to this group, and am planning a build (McSorley 7 +442). I am looking specifically for advise on rear axle choices that work well with the 4" width...
Has anyone installed or seen an in-line 6 cylinder 2.5 liter engine in a Locost, I have a 325i, and would like to use the engine and transmission if it will...
G’day John I'm using a Subaru Impreza rear end in my Locost. It comes with IRS 4.4:1 LSD Diff and its all mounted on is own small sub frame. One thing modify...
Michel: There have been some inline six cylinder Locost builds, but I cannot recall if there was one using a BMW donor. I know some BMW 4 cylinder Locosts...
There's a couple of pics here http://locost7.info/mirror/z7locost.php Couldn't find any more updates though. Would have been good to see how it turned out. ...
Hello everyone I am giving the first steps in locost, but before start to make the seven with the book by RON CHAMPION, I have a question. Intending to use RON...
Building and homologating a car in spain is a very trivial issue as no one has done it yet, specially with a locost. may people who build replicas or refurbish...
Hello, this is my first time posting. I have a very elementary knowledge of loscosts so please forgive me if the answer this questions seems obvious. Anyway I...
... There was some discussion about diesel engines (not diesel bikes) earlier and I recall that there is an adapter kit available to mate a VW engine to a...
This is intended for roldao_tiago@... because I can't send offline as I am blocked. He needs the corrections to Ron's book contained in this excellent...
SVA is only valid in the United Kingdom I'm afraid - different countries have different systems for approving self built vehicles. As a heads up to UK...