Dear All, This is getting worse and worse. I drilled four new holes so I could screw in #4-40 machine screws to reattach a couple of the tags to my Delta 1460...
Look for a machine shop supply, there is a tool that goes in there for this purpose. Thanks, Tony D. David Eisan <dfeisan@...> wrote:Dear All, This is...
... for this purpose. ... I don't know what tool he's talking about, but do what Tony said. Next time, I'd recommend using drive screws. Do a search of the ...
IIRC it kinda has "fingers" that ride in the flutes of the tap and a nut or sleve that tightens down and locks the "fingers" down. Can you possible get a pair...
... The point is kinda moot as it did look like it finally went for the BIN price of $450. With that out of the way, the local Bob Ivens Kookie Kutter Price...
If you can get a small butane torch, (the toy type) and heat the tap, you may be able the destroy its temper and then drill it out. The second option is to...
... 'Preciate the side-by-side John. For the record I did get a Hunnert Dollar one from NH Northern yesterday. It's currently in the shop all set up (it came...
Although Suck-mate of the year is a obvious distinction for this group we could also have: "Old arn man of the year" (ok, I stole that from John Madden) ...
... Did you really mean *can afford* a front loader ? Or were you meaning to say *can't afford* ? I have a front-end loader and lemme say, there are times I...
... for this purpose. ... __________ I think that you are referring to Walton tap extractors: http://www.waltontools.com/products/extractr.htm Good for broken...
... Probably neither, it's just hard to start at $450 when that's probably all it's worth. It'd be better for the seller to start at a buck with a reasonable ...
... butter off the roof of your mouth......... Sometimes you can tap it with a drift or screwdriver CCW (lube well) " you can get a spanner(two prongs)...
While we all stood/sat agawk (?) at the Delta RAS salesman's sample months ago, an Oliver plow model has now surpassed the saw's highwater mark.... and still...
... Just income tax, I believe. Schedule C. Mike IA who claims every dime of his income and wishes he had a way to deduct the cost of all these machines...
... I've off-loaded a number of items with the loader on my Massey with frustrating results. Seeing my frustration, for my birthday this year, LOML (St. Kate)...
I have come into posession of an old J.D. Wallace lathe. I am trying to get an idea of the age and value of this beautiful piece. The only clue I can come up...
My new Unifence arrived on Wednesday, so I got to install it and do the final installation work on the DeWalt sliding table. I plan on doing a little write-up...
... Given the vintage you favor, wouldn't that be KeeterShoppeY2K minus LX?:) Kirk Poore who's wife is deciding to redo the family room in Craftsman decor ...
Hello there, ... mini-RAS for the archives? If so, I'd like to get a copy. I saw one of those in person at the Delta Canada head offices in Guelph Ontario,...
... trying ... only ... There is info hovering inside the mothership, Johnny, about the Wallace company and their product line... no catalogs, though: ...
Many of you would have seen young David's post on the "tons of iron" auction. It really was mouth watering. As fate would have it, I ended up with the Wadkin...
... Welcome to the group and conrats! on the auction score. There are many places to shop for a lathe toolrest socket/banjo (used), so I wouldn't hand over the...
Subject: [oldwwmachines] DeWalt sliding table is on the Unisaw... I for one will be as close to holding my breath as I can, awaiting your write-up, close up...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
