Bob: Iım assuming that the rails are mounted on a machine and now they wonıt work. Loosen the two back screws holding the back clamp and try moving it. ...
We also have a 12 inch BC planer at the Illinois Railway Museum and it apparently has been modified over the years to change the motor mount to locate it under...
What size wheels?? I can maybe help with 20² and smaller, but Iıve no experience with the large ones. ... [Non-text portions of this message have been...
I thought there was a copy of this manual ready for download in the OWWM archives submitted by Tim Smith?? Have you guys checked there for something? ... ...
I mic'd it at 1.375" + 0.001 in a few spots. Did the old sight along the rail for wow but can't detect any. Does seem even worse when attached to the saw...
It binds even before mounting on the machine. When I hold the rail and clamp in my hands and try to push the clamp on I need to twist it and push and pull....
When you say spacingı, I can only assume you mean the distance between the two slots and its relation to where the blade is. The answer to that is that...
Try locking the fence on both guide rails. It its the same, then maybe the fence got dropped and bent oval one of the ends of the fence head. You might try...
So it's a pretty cool lathe from the boys at Wallace in Chicago. I posted pics of it recently and thought it was worth a last shot for someone on the group to ...
Oh, and for those of you's that don't know, I'm in the lower extremety of "America's Dairyland"(1), aka WI. (1) A title we haven't earned in many many moons,...
On the slot dimensions, I thought I would share that the 1948 Powr Kraft saw I have (perhaps made by DURO) they are an odd size. 5/16 deep and 3/4 wide. I...
Tony: Iıve looked at those shots of the lathe at least six times and will do so some more. Thanks for your efforts on our behalf. If I was closer and didnıt...
This may sound strange but is it possible the rail is smaller than it should be? Perhaps the guide bar is worn enough to allow the fence to pivot enough to...
... ++++++++++++++++++++++++++++++ Back away from the planer. First do not, I repeat do not start searching for old hand tools. You will find no end to them...
I've yet to find the ultimate balancing setup, but here is what I know. Remove the blade. For the top wheel, spin the wheel and let it come to rest. Mark the...
... Ahem! In addition to the solutions (literally in Peter C.'s case!)(bucket O' warm water an a catchers mitt? hee HEEE...)that others have proffered--- and...
Q: How many internet mail list subscribers does it take to change a light bulb? A: 1,331: * 1 to change the light bulb and to post to the mail list that the...
Being a newbie to this stuff, Iım seeing real quick the humor in that. Iıll be passing it along. Bob Vaughan ... [Non-text portions of this message have...
For all of you who get quite excited about four footed Delta items, I noticed a four footed Delta Drill Press on eBay today. Interestingly enough it has three...
Here I am, 8:30 this morning, freezing my a$$ off in the snow and cold that has returned to Southern Vermont, trying to find some property pins for an old guy...
People... hello!?! ... __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more ...
Another country heard from. The trick to balancing is to get the wheels in a friction-free environment when they are rotated. Crude but effective works for...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
