tern : Messages : 14-43 of 2261

Messages: Simplify \| Expand (Group by Topic)		Author	Sort by Date

14		mikespaner	Dec 5, 2001 5:12 pm
	Hi, I am using the PIO P14 as an input. The namual states that it is initially configured as input with pullup. I didn't see a pullup shown on the schematic...
15		tern_inc	Dec 5, 2001 5:13 pm
	Mike, The (weak) pullups/pulldowns for all of the PIO pins, including P14, are actually inside the processor itself. You can find details within the Am186ES...
16		mchrist1021	Dec 6, 2001 4:57 pm
	Hello, I am using a Tern A104 board with a MemCard Ethernet interface. When I mount the two boards H8 and J2 are not accessible. How do I use the header? ...
17		tern_inc	Dec 6, 2001 5:04 pm
	... In the future, you can specify that the headers H8 and J2 should be either type "E" (Even) or type "B" (Bottom). The pins would then be accessible from...
18		Jose Inacio Coelho jinacio	Dec 11, 2001 12:33 am
	Hi There's a way to recover a tern A-core after a battery damage? We've tried to protect eight tern with alluminium foil (we're run out antistatic bags). So,...
19		tern_inc	Dec 11, 2001 12:42 am
	Sir, ... That's not a very good idea. :P ... Assuming you didn't power on the board while it was still shorted by the foil... there should have been no damage...
20		mikespaner	Dec 13, 2001 5:05 pm
	I've go an urgent question. I am using the A104 pcb. I am having problems with the debug operation. Everything was working fine and then I seemed to lose the...
21		mikespaner	Dec 13, 2001 6:48 pm
	I tried our other a104 pcb to see if the same debug problem appeared. Sure enough both boards are acting the same so it looks like it is somehow related to the...
22		tern_inc	Dec 13, 2001 6:52 pm
	... appeared. ... have ... Mike, That's exactly right. We've observed a situation in Paradigm C++ where, occasionally (we believe it usually starts with...
23		fdelgado@... homo_tern	Dec 14, 2001 5:03 pm
	Mike. I experience same problems when I have two kinds of cases: 1) Pointer to IRQ or servide not correctli defined. 2) Char pointer overwrite outside of size....
24		mikespaner	Dec 14, 2001 5:04 pm
	Here is what I found on Windows 2000 installation: 1. I tried to re-install over the exisitng Tern and Paradigm install with out un-installing. The problem...
25		tern_inc	Dec 14, 2001 5:06 pm
	All, TERN will be closed for the next two weeks for an extended winter holiday. We'll be back in business on Jan. 2, 2002. Some of us will try to remain in...
26		kurtkurtus	Jan 2, 2002 5:42 pm
	Hi, I was thinking of purchasing your evaluation package. I have an application that requires the use of floating point numbers, and transcendental functions...
27		tern_inc	Jan 2, 2002 5:47 pm
	... Kurt, Yes, the Paradigm C++ software development environment provided as part of the EV-P and DV-P provides the usual range of floating point libraries......
28		Greg Carter gcarter1	Jan 7, 2002 5:02 pm
	Hi, I recently tried out UCOS-II version 2.51 on my TD-86 board (186ES). You can find the zip file on http://www.ucos-ii.com/ports_v2-intel.htm . As long as...
29		robinshen_2000	Jan 8, 2002 4:33 pm
	before i have ported UCOS-II version 2.0 to A-Engine86-P board with Paradigm-Tern version(small memory model), if anybody needs, pls contact me. ... (186ES)....
30		matthew_reno	Jan 9, 2002 8:16 pm
	Using AE-P-40 w/128K ACTF_AE I can build, flash, and run led.hex. However, when uploading my target code, ACTF responds with VVVV ... VVVVV ERROR ! RESET ! ...
31		tern_inc	Jan 9, 2002 8:41 pm
	Matt, I've just uploaded to the 'Files' section of the TERN Community a standard copy of 'led.hex' that has been tested on Am188ES systems. You might want to...
32		jinacio	Jan 9, 2002 8:41 pm
	Hi does somebody tried to port linux to terns? have you been noticied that? greetz jic...
33		tern_inc	Jan 10, 2002 12:37 am
	Thanks for bringing that to our attention; that's a new one. We've had issues where Hyperterminal was strangely slow, on both NT 4.0/Windows 2000 machines......
34		andrewmasterson2001 andrewmaster...	Jan 22, 2002 5:27 pm
	I'm developing a product that will incorporate the usage of a TD-40. I Purchased the TD-40 EVAL kit thinking that I could "figure" it out, but I can't! Would...
35		tern_inc	Jan 22, 2002 5:35 pm
	This is something I personally would be interested in... but from what I've seen, even the most hard embedded Linux kernel still demands more memory than is...
36		Jim jvpoll@...	Jan 23, 2002 4:39 pm
	I've got an application that negotiates a PPP (Point to Point Protocol) link and I've run into a snag with the TD40. It seems that whatever routine that places...
37		TERN (Chon) tern_inc	Jan 23, 2002 8:58 pm
	Andrew, I don't know if anyone else has contacted you directly, but if not... TERN is always available to help you on basic design issues such as yours...
38		mikespaner	Jan 23, 2002 8:59 pm
	The IDE locks up a few times a month because of this problem. What plans does Tern have to fix the root casue of the problem? The re- installation step is...
39		tern_inc	Jan 23, 2002 9:05 pm
	... Mike, Sorry to hear the problem persists... but it just isn't one we're able to replicate here. I myself use a Windows 2000 workstation, and have for the...
40		Jim jvpoll@...	Jan 25, 2002 4:16 pm
	Hello all. I did some further tests on the problem I'm having with sending data to the Serial 1 port. As stated before, the SCC port, when swapped with the...
41		Jim jvpoll@...	Jan 26, 2002 12:49 am
	Doing some additional investigating ... Someting in my application causes the Break Detect bits in the SP1STS (Offset 12h) control register to become set -...
42		joseph_keto@... tern_inc	Jan 26, 2002 12:52 am
	... Mike, I have the "illegal opcode trap" error occasionally. I am using a different device (the AE-40 with MC2540 motion controller), but maybe I can be of...
43		jelinser	Jan 28, 2002 6:23 pm
	I recently read at "http://www.amd.com/epd/processors/2.16bitcont/2.am186exfa/6.am186e s/index.html" that the 188ES processor is no longer available. The ...

Yahoo! Groups

Group Information

Yahoo! Groups Tips

Did you know...

Messages