Hi All (& Happy New 2009!) I am having a little trouble using INT6 on the EL. Perhaps you might be able to help? The interrupt is triggered by raising...
1976
Mário
v0ynich
Jan 5, 2009 10:20 pm
Hi! I've lost the L_29F400.HEX file for my AE86P.. does anyone have it? can you send me? Thanks! Mário...
1977
Chon Tang
tern_inc
Jan 5, 2009 11:59 pm
Mario, I'll go ahead and send you a copy of the file directly offline. If you have your CD, you can always reinstall (or just copy the file) from the CD as ...
1978
Chon Tang
tern_inc
Jan 6, 2009 12:01 am
Dave, What kind of circuitry is feeding into the interrupt? If it's a mechanical switch, then it's definitely possible thousands of interrupts might result ...
1979
dave.lyneham
Jan 6, 2009 1:41 am
Hi Chon, Nice to hear from you!. Yes, the interrupt is fed from a reed switch, contacts closed by a nearby magnet. However, 2 things: 1 - I use some input...
1980
Mário
v0ynich
Jan 6, 2009 1:42 am
Many thanks for your fast reply! I will try it as soon as possible and I will let you know if everything is working. Regards, Mário ... you have...
1981
dave.lyneham
Jan 6, 2009 4:20 pm
Hi Chon, Just a quick note to clarify. When I said the interrupt is called thousands of times, I should have said that the interrupt service routine is called...
1982
b.henry1978
Jan 16, 2009 7:13 pm
What is the best way to monitor an analog input to switch on/off a digital output. I need to watch a water elevation and control a motor to a gate. Thanks....
1983
tamkastar
Jan 28, 2009 7:12 pm
Hello, I have been running an RA-80 processor board in standalone mode quite successfully for the last 2-3 months. When I connect power to the board, the red...
1984
callus1813
Jan 28, 2009 7:13 pm
Hi Greg, I have the same issue. I get a drift between 7 and 30 seconds too fast per hour. After a few days my time stamped data is way off. I have tried to...
1985
Chon Tang
tern_inc
Jan 30, 2009 12:41 am
Franklin, Thanks for putting time in and offering to share that code! I hope others find it useful... if you don't mind sending it to me (especially the NIST ...
1986
Chon Tang
tern_inc
Jan 30, 2009 12:55 am
Hi there, I agree with you, it's unlikely that the battery is responsible. The voltage seems healthy, and you would absolutely expect the real-time clock to...
1987
volodymyr_ztz
Jan 30, 2009 5:41 pm
Hi Chon! Very good explanation. I faced with the same problem. I can't go in debug mode. When I reload debug kernel and type Gxxxx the LED blink twice and I'm...
1988
Chon Tang
tern_inc
Jan 30, 2009 7:05 pm
Vladimir, That's really interesting behavior... if I understand you correctly, you are saying that: - you type GFA000, and the board goes to the debugger...
1989
Chon Tang
tern_inc
Jan 30, 2009 11:33 pm
Hey Brian, Apologies for the late response... I fired off a reply weeks ago from a different account, but just realized Yahoo filtered from the group. Back to...
1990
spamka
tamkastar
Feb 5, 2009 12:20 am
Hello everyone, After playing around with the system a bit, we seem to have solved the problem. Early in the program, our system attempts to initialize the CF...
1991
Chon Tang
tern_inc
Feb 5, 2009 12:39 am
Hi again, Yep, that's exactly the problem. I wish I had mentioned that first! As part of the standard "exit" procedure for a C application, I believe the ...
1992
spamka
tamkastar
Feb 5, 2009 12:42 am
Hello, In my project using the RA-80 TERN board, I run 8 A/D convertors, and write their values to the CF card. The code for both the A/D conversion and for...
1993
Chon Tang
tern_inc
Feb 6, 2009 6:32 pm
Franklin, Just to follow up again, we've repeated tests with LCD, serial port, and Ethernet all in operation on the EL... doing so definitely increased the ...
1994
Chon Tang
tern_inc
Feb 6, 2009 8:41 pm
Hi there, There are actually a number of tricks available for increasing sample rate. You'll find that ultimately CompactFlash remains the bottleneck when...
1995
Shankaranarayanan
srishankaran...
Feb 10, 2009 6:23 pm
Hello, Â Â Â Â Â I was wondering whether are there any pre-built GUI buttons available for the UD controller. I am trying to develop a touch screen based...
1996
dave.lyneham
Feb 11, 2009 4:19 pm
Hi everyone, I have been successfully using Paradigm C++ under Vista for around a month, running as an administrator. Today, something new. Although other...
1997
Chon Tang
tern_inc
Feb 11, 2009 7:14 pm
Dave, I'm baffled, I've never seen that message before. Must be something system-specific, since you mentioned it used to work correctly. Have you verified...
1998
jaredtritz
Feb 11, 2009 7:52 pm
... available for the UD controller. I am trying to develop a touch screen based application. Or do I need to create my own. If so then would I be able to add...
1999
dave.lyneham
Feb 11, 2009 10:21 pm
Hi Chon, Thank you for your quick reply! To answer your questions, I have tested the port with other programs. Hyperterminal isn't included with Vista as far...
2000
Chon Tang
tern_inc
Feb 11, 2009 10:34 pm
Dave, I did some googling around after your previous email, and also found other people with similar.. confused.. complaints. All I know is that it's not a ...
2001
dave.lyneham
Feb 11, 2009 11:00 pm
Hi Chon, My USB RS232 device is just a bit old and sluggish, I'm sure a newer one would be faster and be able to cope with 115200 baud. Incidentally, I sent a...
2002
callus1813
Feb 12, 2009 5:50 pm
Hi all, I am working with the EL with the Ethernet option installed. When I connect to the network using static IP, gateway and netmask. I have no problems...
2003
spamka
tamkastar
Feb 17, 2009 5:55 pm
Hi everyone, The RA-80 engine I am using has a CF card interface that accepts a CF card with a maximum of 1Gb. None of the stores in my area carry anything...
2004
Chon Tang
tern_inc
Feb 17, 2009 7:42 pm
Hi Franklin, From the point of view of any IP end-point... all it knows about are the settings you mentioned (IP/netmask/gateway). Those are the only settings...
