Does anyone have a tool that will terminate Amp PN 553257-1 50 position
Back-to-back champ connector. I believe that Amp's tool number is 230506-3
without the arbor press or 230506-1 with the press. Please advise ASAP, we
had a loaner lined up but it fell through. We have a one time requirement

Regards

Bob Potysman, President
Assembly Solutions, Inc.
972-606-2101 Phone
972-606-2103 Fax

I just thought of another distributor.

Terminal Supply    1-800-989-0824

Thanks....

Dawn Dees
Senior Buyer

Interstate Industries of MS, LLC
662-289-3877  Ext. 342
Fax  662-289-4351
deesdd@...
www.interstatellc.com


-----Original Message-----
From: Maxwell Grant [mailto:maxwell@...]
Sent: Friday, August 17, 2001 9:36 AM
To: 'whma@yahoogroups.com'
Subject: RE: [WHMA] Packard terminal #12124520


Thank you, Dawn!

Maxwell Grant
Oak Hill Engineering, Inc.
4480 8th Ave.
Marion, IA 52302
Tel.: (319) 377-6844
Fax: (319) 377-7396
Email: maxwell@...





To unsubscribe from this group, send an email to:
whma-unsubscribe@yahoogroups.com


Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Thank you, Dawn!

Maxwell Grant
Oak Hill Engineering, Inc.
4480 8th Ave.
Marion, IA 52302
Tel.: (319) 377-6844
Fax: (319) 377-7396
Email: maxwell@...

We don't currently use these but I have gotten parts, when in desperate
need, from a distributor, Peters de Laet.  Phone # 1-800-443-2832. Good
luck.

Thanks....

Dawn Dees
Senior Buyer

Interstate Industries of MS, LLC
662-289-3877  Ext. 342
Fax  662-289-4351
deesdd@...
www.interstatellc.com




-----Original Message-----
From: Maxwell Grant [mailto:maxwell@...]
Sent: Thursday, August 16, 2001 1:37 PM
To: 'whma@yahoogroups.com'
Subject: [WHMA] Packard terminal #12124520


Good afternoon,

Does anyone have a reel of these laying around for sale?  My need isn't
immediate, but possibly w/in a couple/few weeks.

Thanks,
Maxwell Grant
Oak Hill Engineering, Inc.
4480 8th Ave.
Marion, IA 52302
Tel.: (319) 377-6844
Fax: (319) 377-7396
Email: maxwell@...



To unsubscribe from this group, send an email to:
whma-unsubscribe@yahoogroups.com


Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Thanx to all for your suggestions and help!

Mark

-----Original Message-----
From: Mark O'Donnell [mailto:marko@...]
Sent: Tuesday, August 14, 2001 10:26 AM
To: WHMA group (E-mail)
Subject: [WHMA] Carpenter


I am near the end and could appreciate anyones help with this one.  We
have a Carpenter model # 32 tubing and ribbon cable cutter that is on
the "fritz".  This machine is obsolete by Carpenter as well as the
replacement part we are looking for.  Does anyone have a machine that
they are not using that they would sell or know where to get the
solenoid(part # 3532) for this beast?

All thoughts and suggestions are welcome.

Thank you!!

Mark A. O'Donnell
President
Kenwood Electrical Systems Ltd.
1904 20th Avenue
Rockford.IL 61104
815-399-0282(phone) 815-399-1984(fax)
marko@...(e-mail)


To unsubscribe from this group, send an email to:
whma-unsubscribe@yahoogroups.com


Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Good afternoon,

Does anyone have a reel of these laying around for sale?  My need isn't
immediate, but possibly w/in a couple/few weeks.

Thanks,
Maxwell Grant
Oak Hill Engineering, Inc.
4480 8th Ave.
Marion, IA 52302
Tel.: (319) 377-6844
Fax: (319) 377-7396
Email: maxwell@...

Brett, Thanks, we will certainly keep it in mind. Will let you know when we
receive quote and thanks!

> -----Original Message-----
> From: Brett Miller [SMTP:brettm@...]
> Sent: Wednesday, August 15, 2001 1:23 PM
> To: whma@yahoogroups.com
> Subject: Re: [WHMA] Ultra Sonic Welding
>
> Judy,
> We do a large amount of ultrasonic welding, but Texas is not near the West
> Coast last time I looked. If we can be of help anyway, let us know.
> Brett Miller
> ----- Original Message -----
> From: "judyw" <judyw@...>
> To: "'Whma message board'" <whma@yahoogroups.com>
> Cc: "joes" <joes@...>
> Sent: Wednesday, August 15, 2001 1:02 PM
> Subject: [WHMA] Ultra Sonic Welding
>
>
> > We have the opportunity to quote on a harness that requires 5 splices of
> a
> > #12 Awg. We don't want to invest in the equipment until we see if this
> turns
> > into any quantities. Is there anyone on the West Coast who has the
> equipment
> > who would quote on the welding operation only? Or if you by chance have
> > equipment for sale, we would entertain that also. Thanks....
> >
> > To unsubscribe from this group, send an email to:
> > whma-unsubscribe@yahoogroups.com
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
>
>
> To unsubscribe from this group, send an email to:
> whma-unsubscribe@yahoogroups.com
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Judy,
We do a large amount of ultrasonic welding, but Texas is not near the West
Coast last time I looked. If we can be of help anyway, let us know.
Brett Miller
----- Original Message -----
From: "judyw" <judyw@...>
To: "'Whma message board'" <whma@yahoogroups.com>
Cc: "joes" <joes@...>
Sent: Wednesday, August 15, 2001 1:02 PM
Subject: [WHMA] Ultra Sonic Welding


> We have the opportunity to quote on a harness that requires 5 splices of a
> #12 Awg. We don't want to invest in the equipment until we see if this
turns
> into any quantities. Is there anyone on the West Coast who has the
equipment
> who would quote on the welding operation only? Or if you by chance have
> equipment for sale, we would entertain that also. Thanks....
>
> To unsubscribe from this group, send an email to:
> whma-unsubscribe@yahoogroups.com
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Judy---sorry we can't help with welding.  We have some assemblies where we
join larger gauge wires (8AWG) using T&B 546XX "two way connectors" that we
crimp in a hydraulic press.  Perhaps you could investigate and propose this
as an alternative.  Regards
----- Original Message -----
From: "judyw" <judyw@...>
To: "'Whma message board'" <whma@yahoogroups.com>
Cc: "joes" <joes@...>
Sent: Wednesday, August 15, 2001 11:02 AM
Subject: [WHMA] Ultra Sonic Welding


> We have the opportunity to quote on a harness that requires 5 splices of a
> #12 Awg. We don't want to invest in the equipment until we see if this
turns
> into any quantities. Is there anyone on the West Coast who has the
equipment
> who would quote on the welding operation only? Or if you by chance have
> equipment for sale, we would entertain that also. Thanks....
>
> To unsubscribe from this group, send an email to:
> whma-unsubscribe@yahoogroups.com
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

We have the opportunity to quote on a harness that requires 5 splices of a
#12 Awg. We don't want to invest in the equipment until we see if this turns
into any quantities. Is there anyone on the West Coast who has the equipment
who would quote on the welding operation only? Or if you by chance have
equipment for sale, we would entertain that also. Thanks....

Hello All,
We ran into a similar situation last year. Our old flat cable and tubing
machines were giving out left and right. We discovered a little company
called AMTI. We purchased model 122 and have had no problems! These machines
are very reasonably priced, have excellent warranties and for product
support you won't find a better group of folks to work with. Customer
service is excellent.
If you find you can't get parts, I highly recommend giving them a look.
Here's the website: http://www.amti-products.com/modelinfo.html
And address:
American Manufacturing
& Technologies, Inc.
731 Racquet Club Drive
Addison, IL 60101 USA

-tel 630 889 1776
-fax 630.889.1779

-email: slice@...

Best Regards,
Mick Wagner
Manufacturing Engineer
Moore Electronics Inc.
Phone: 503-691-7178
Fax: 503-692-0878
m_wagner@...


-----Original Message-----
From: Bill Brown [mailto:bill@...]
Sent: Tuesday, August 14, 2001 9:14 AM
To: whma@yahoogroups.com
Subject: [WHMA] Carpenter


>I am near the end and could appreciate anyones help with this one.  We
>have a Carpenter model # 32 tubing and ribbon cable cutter that is on
>the "fritz".  This machine is obsolete by Carpenter as well as the
>replacement part we are looking for.  Does anyone have a machine that
>they are not using that they would sell or know where to get the
>solenoid(part # 3532) for this beast?

>All thoughts and suggestions are welcome.

>Thank you!!

>Mark A. O'Donnell
>President
>Kenwood Electrical Systems Ltd.

Mark - I'm not familiar with that specific machine but similar
machines use a spring wrap clutch to drive the cutter blade from
a rotating shaft. (Specifically Eubanks) There are only a couple
mfg of this kind of part and we found a name somewhere on the
device. A call to the spring wrap clutch company solved our
obsolete replacement problem.

Bill Brown
Squires Electronics, Inc


To unsubscribe from this group, send an email to:
whma-unsubscribe@yahoogroups.com


Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

>I am near the end and could appreciate anyones help with this one.  We
>have a Carpenter model # 32 tubing and ribbon cable cutter that is on
>the "fritz".  This machine is obsolete by Carpenter as well as the
>replacement part we are looking for.  Does anyone have a machine that
>they are not using that they would sell or know where to get the
>solenoid(part # 3532) for this beast?

>All thoughts and suggestions are welcome.

>Thank you!!

>Mark A. O'Donnell
>President
>Kenwood Electrical Systems Ltd.

Mark - I'm not familiar with that specific machine but similar
machines use a spring wrap clutch to drive the cutter blade from
a rotating shaft. (Specifically Eubanks) There are only a couple
mfg of this kind of part and we found a name somewhere on the
device. A call to the spring wrap clutch company solved our
obsolete replacement problem.

Bill Brown
Squires Electronics, Inc

I am near the end and could appreciate anyones help with this one.  We
have a Carpenter model # 32 tubing and ribbon cable cutter that is on
the "fritz".  This machine is obsolete by Carpenter as well as the
replacement part we are looking for.  Does anyone have a machine that
they are not using that they would sell or know where to get the
solenoid(part # 3532) for this beast?

All thoughts and suggestions are welcome.

Thank you!!

Mark A. O'Donnell
President
Kenwood Electrical Systems Ltd.
1904 20th Avenue
Rockford.IL 61104
815-399-0282(phone) 815-399-1984(fax)
marko@...(e-mail)

We have for sale the following Artos Machines

CS 600 with two TU Presses Serial Number 51166-001 (1996) Asking $19,500

CS 26 with SG-1 TU 3 Press Serial Number 50118-001 (1994) Asking $7,800

Sandy Brown
Elec-Tec
800-294-8880
229-244-1828
Valdosta, GA

We use AutoCad Mechanical 6.

Dennis Wardell
Engineering Manager
Vermillion Inc.
4754 South Palisade
Wichita, KS 67217

Phone: 316-524-3100 Fax: 316-524-2012
Web: www.vermillioninc.com


> -----Original Message-----
> From: Dawn Dees [SMTP:deesdd@...]
> Sent: Friday, August 10, 2001 8:06 AM
> To: whma@yahoogroups.com
> Subject: RE: [WHMA] RE:  Software - Harness Drawings
>
> We use AutoCad 2000.
>
> Dawn Dees
> Interstate Industries of MS, LLC
>
> -----Original Message-----
> From: jmibach [mailto:j_mibach@...]
> Sent: Thursday, August 09, 2001 6:14 PM
> To: whma@yahoogroups.com
> Subject: RE: [WHMA] RE: Software - Harness Drawings
>
>
> We also use AutoCad 2000.
>
> -----Original Message-----
> From: kikco1@... [mailto:kikco1@...]
> Sent: Thursday, August 09, 2001 8:39 AM
> To: whma@yahoogroups.com
> Subject: Re: [WHMA] RE: Software - Harness Drawings
>
>
> We use autocad 2000i, great program, but it runs $3000., autocad LT is a
> good
> program at a lesser cost.
>
> Dan Berry
> KIKCO Elect
>
>
> To unsubscribe from this group, send an email to:
> whma-unsubscribe@yahoogroups.com
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
> To unsubscribe from this group, send an email to:
> whma-unsubscribe@yahoogroups.com
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> whma-unsubscribe@yahoogroups.com
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

We use AutoCad 2000.

Dawn Dees
Interstate Industries of MS, LLC

-----Original Message-----
From: jmibach [mailto:j_mibach@...]
Sent: Thursday, August 09, 2001 6:14 PM
To: whma@yahoogroups.com
Subject: RE: [WHMA] RE: Software - Harness Drawings


We also use AutoCad 2000.

-----Original Message-----
From: kikco1@... [mailto:kikco1@...]
Sent: Thursday, August 09, 2001 8:39 AM
To: whma@yahoogroups.com
Subject: Re: [WHMA] RE: Software - Harness Drawings


We use autocad 2000i, great program, but it runs $3000., autocad LT is a
good
program at a lesser cost.

Dan Berry
KIKCO Elect


To unsubscribe from this group, send an email to:
whma-unsubscribe@yahoogroups.com


Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



To unsubscribe from this group, send an email to:
whma-unsubscribe@yahoogroups.com


Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

We also use AutoCad 2000.

-----Original Message-----
From: kikco1@... [mailto:kikco1@...]
Sent: Thursday, August 09, 2001 8:39 AM
To: whma@yahoogroups.com
Subject: Re: [WHMA] RE: Software - Harness Drawings


We use autocad 2000i, great program, but it runs $3000., autocad LT is a
good
program at a lesser cost.

Dan Berry
KIKCO Elect


To unsubscribe from this group, send an email to:
whma-unsubscribe@yahoogroups.com


Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

We use dynacad (a simple cad program) does anyone use Linius or capital H ??
they seem quite expensive, are they worth it??

Steve Whittall
Elite Technical Inc
swhittall@...

----- Original Message -----
From: <daseneca@...>
To: <whma@yahoogroups.com>
Sent: Wednesday, August 08, 2001 5:56 AM
Subject: [WHMA] RE: Software - Harness Drawings


> We are looking for a reasonably priced software for drawing ONLY - or
> designing and drawing Cable Assemblies/Wiring Harnesses.  Please let us
know
> what other members are using, to their satisfaction, - - is any software
> becoming some "standard" or "generally used" - -
>
> Thanks - Don Seneca - DTP Inc. - Mercury Electronics Div.
> daseneca@...
>
>
> To unsubscribe from this group, send an email to:
> whma-unsubscribe@yahoogroups.com
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

We use autocad 2000i, great program, but it runs $3000., autocad LT is a good
program at a lesser cost.

Dan Berry
KIKCO Elect

Don,
We use Auto Cad Lt. and it does a pretty good job. We use another for our
Bill of Materials. Actually we use excelle for them and it is compatable
with some of the newer machines.
Merrill Valberg - Valberg Corp.

----- Original Message -----
From: <daseneca@...>
To: <whma@yahoogroups.com>
Sent: Wednesday, August 08, 2001 4:56 AM
Subject: [WHMA] RE: Software - Harness Drawings


> We are looking for a reasonably priced software for drawing ONLY - or
> designing and drawing Cable Assemblies/Wiring Harnesses.  Please let us
know
> what other members are using, to their satisfaction, - - is any software
> becoming some "standard" or "generally used" - -
>
> Thanks - Don Seneca - DTP Inc. - Mercury Electronics Div.
> daseneca@...
>
>
> To unsubscribe from this group, send an email to:
> whma-unsubscribe@yahoogroups.com
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

We are looking for a reasonably priced software for drawing ONLY - or
designing and drawing Cable Assemblies/Wiring Harnesses.  Please let us know
what other members are using, to their satisfaction, - - is any software
becoming some "standard" or "generally used" - -

Thanks - Don Seneca - DTP Inc. - Mercury Electronics Div.
daseneca@...

Does anyone have 200-500' of 2GA UL1283 blue wire they'd be willing to part
with for a reasonable cost?

Steve Pilipchuk
Wallace Electronics
10551 Miller Road, Suite 100
Dallas, Texas  75238
P(214) 340-0400 x18
F(214) 340-0404

Has anyone used the Telecom Savings Program through the WHMA? Have you
switched to their recommended carrier? Are you happy with them? Thanks!
Jeff Olds, Oleco Inc.

I guess "surplus" is when the office screws up and "scrap" is
when the shop screws up. And don't fib to me, everybody has
surplus scrap !

Our surplus teflon wire is in prime shape, still on the original
spools. It glistens in the Oregon sunshine as the sun slowly sets
in the west. A light dew caresses it every morning. This stuff is
so perfect, all you have to do is point it towards a cutting
machine and it falls apart in the exact lengths required. Whisper
sweet nothings under it's insulation and a beautiful red strip
appears along it's entire length.

But wait, there's more. If you act now and call us in the next 10
minutes, we will include, absolutely free, a matching spool of
black wire. Operators are standing by.

-bill

>Bill, "What is surplus?" Is that like scrap? Of course, we don't know what
>either of these items are!!!

>> -----Original Message-----
>> From:        bill@... [SMTP:bill@...]
>> Sent:        Thursday, August 02, 2001 9:41 PM
>> To:  whma@yahoogroups.com
>> Subject:     [WHMA] First post at Yahoo
>>
>> If you get this message you made it to the other side :-)
>>
>> If you didn't get this message, sorry, you must be the weakest link.
>>
>> Welcome to the WHMA ListServ on Yahoo. It is very similar to the old
>> ListBot, just different addresses. The are:
>>
>> Post message: whma@yahoogroups.com
>> Subscribe:  whma-subscribe@yahoogroups.com
>> Unsubscribe:  whma-unsubscribe@yahoogroups.com
>> List owner:  whma-owner@yahoogroups.com
>>
>> Or you can do everything on the web at:
>>
>> groups.yahoo.com/group/whma
>>
>> Give it a try. Everyone has something they want to get rid of. Just
>> write an email and send it to whma@yahoogroups.com.
>>
>> REAL EXAMPLE
>>
>> For sale, 28/19 teflon, UL1213, Blk and Red, tens of thousands of
>> feet. Cheap!! Make offer.  bill@...
>>
>> Now - you go ahead and post one of your surplus items.
>>
>> Bill@...
>>
>>
>>
>> To unsubscribe from this group, send an email to:
>> whma-unsubscribe@yahoogroups.com
>>
>>
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>>


>To unsubscribe from this group, send an email to:
>whma-unsubscribe@yahoogroups.com
>

>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Bill, "What is surplus?" Is that like scrap? Of course, we don't know what
either of these items are!!!

> -----Original Message-----
> From: bill@... [SMTP:bill@...]
> Sent: Thursday, August 02, 2001 9:41 PM
> To: whma@yahoogroups.com
> Subject: [WHMA] First post at Yahoo
>
> If you get this message you made it to the other side :-)
>
> If you didn't get this message, sorry, you must be the weakest link.
>
> Welcome to the WHMA ListServ on Yahoo. It is very similar to the old
> ListBot, just different addresses. The are:
>
> Post message: whma@yahoogroups.com
> Subscribe:  whma-subscribe@yahoogroups.com
> Unsubscribe:  whma-unsubscribe@yahoogroups.com
> List owner:  whma-owner@yahoogroups.com
>
> Or you can do everything on the web at:
>
> groups.yahoo.com/group/whma
>
> Give it a try. Everyone has something they want to get rid of. Just
> write an email and send it to whma@yahoogroups.com.
>
> REAL EXAMPLE
>
> For sale, 28/19 teflon, UL1213, Blk and Red, tens of thousands of
> feet. Cheap!! Make offer.  bill@...
>
> Now - you go ahead and post one of your surplus items.
>
> Bill@...
>
>
>
> To unsubscribe from this group, send an email to:
> whma-unsubscribe@yahoogroups.com
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Just testing to be sure we are on line. Please ignore this message.

It's WHMA's policy to not have member companies to place want ads; however,
qualified people seeking executive positions within our industry may contact
me and offer to email their resume.  As appears below, please find such a
resume.  ( I did not make it an attachment due to the recent email
attachment virus scares.)

> Please follow up directly with Dave Byers at (630) 904-7450 if you are
> interested,
>
> Cordially,
>
> Andy Larsen
>
>
>
>
>
>
>
> David R. Byers
> 2316 Joyce Lane; Naperville, IL 60564; dbyers2316@...
> <mailto:dbyers2316@...>; 630-904-7450
>
> Decisive executive with more than 20 years of manufacturing management
> experience.   Excellent business, and leadership skills.  Track record of
> strategic leadership with a record of increasing revenues, reducing costs,
> and strengthening competitive position.  Proven ability to streamline
> processes, reengineer operations, and achieve the highest standards for
> productivity, performance, and quality.  Innovative team-builder with the
> drive and vision required to establish market leadership.
>
> * Strategic Analysis and Planning * Product and Business Development
> * Process Improvement Programs * Start-Up Management
> * Systems Implementations * International Quality Certification
> * Lean Manufacturing and Restructuring * Profit and Loss
> Responsibility
>
> Career Objectives
> Particular interest in general or senior management role for custom,
> industrial or commercial products. Target business unit size $5 to $100
> million.  Open to relocation.
>
> Organization Benefits
> J&L Fiber Developed break-through new product for $10 million aftermarket
> business serving the pulp and paper industry.  Eight-year-old business
> needed new technology design to compete with established competitors.  New
> product designed ready for field trials in less than 5 months.  Product
> attributes will provide customers with 50% better performance at 2/3
> current price and 1/3-market lead-times.  Product will provide 100% growth
> of business in three years, excellent profit margins and solve warrantee,
> credit and throughput issues.
>
> Monona Wire Turned around corporation for profitable sale by restructuring
> manufacturing processes.  Eliminated hundreds of floor stocked inventory
> items, reduced work order sizes, cut shop order lead-time by 40%.  Moved
> work to focused cells, eliminating 10 departments.  Instituted capacity
> and production planning and installed automation to reduce direct labor.
> DeKalb workforce reduced from 400 to less than 300.  Saved $1.5 million.
> Earnings improved 18%.  Share price increased by 210%.  Past due delivery
> reduced 92%. Rejects reduced 94%.
>
> Thomas & Betts Dramatically reduced cycle time for manufacturing
> operations.  Custom fabrication of steel products required long lead times
> due to bottlenecks in drawing preparation.  Motivated personnel to meet
> stricter standards while simultaneously beginning an automation program.
> First tools were on-line in only three months, with continuing
> productivity improvements over the following year and a half.  Required
> lead times decreased by 50%, on-schedule deliveries rose from 40% to 95%,
> and revenue increased $10 million.
>
> Emerson Electric Managed transition for a shift of manufacturing to lower
> cost facilities.  High-profit core product production was being
> transferred to a new plant, with shutdown scheduled for the older,
> union-labor operation.  Potential for sabotage was considered high after
> unsuccessful bargaining.  Worked with employees at the closing plant to
> establish trust and redefine duties in the transition.  Organized massive
> equipment transfer program, which continuously supplied over 10,000
> catalog items to more than 1,200 customers.  The new facilities cut
> production costs by $7 million per year without a single incident of
> sabotage.
>
>
> EMPLOYMENT HISTORY 	 David R. Byers 	 Page 2
>
> J & L Fiber Services (Division PCC Corp.) 2000 - 2001
>
>  General Manager of $10 million business unit of $60 million
> division.  Supplied after-market screening cylinders to the pulp and paper
> industry.  Full profit and loss responsibility.
>
> Monona Wire Corp 1997 - 1999
>
>  Chief Operating Officer and Sr. Vice President for an $80 million
> wire harness manufacturer supplying Caterpillar and John Deere.  Full
> profit and loss responsibility, 11 facilities, and 1100 employees.
>
> Thomas & Betts Corporation (Electrical, Electronic, HVAC Components) 1992
> - 1997
>
>  Vice-President and General Manager for a $30 million division.  Full
> profit and loss responsibility including leadership of 190 employees in
> Operations, Marketing, Engineering, Finance, Human Resources and
> Information Technology.
>
>  Vice-President of Engineering for $2 billion manufacturer.
> Responsible for new product development, process improvement, CAD, test
> labs, and standards associations.  Led multi-departmental effort to
> achieve ISO 9001 certification.
>  Concurrently Operations Manager for two plants producing $100
> million in annual revenues of utility transmission poles (large steel
> fabrications).
>
> Emerson Electric Company (Appleton Electric) 1978 - 1992
>
>  Vice-President of Engineering for a $160 million subsidiary
> producing electrical construction materials.  Responsibility for product
> development, test laboratories, CAD, product liability, quality assurance,
> and trade association communications.
>
>  Earlier assignments as Director of Manufacturing Engineering,
> Director of Purchases, Cost Reduction Director, Plant Manager, and
> Manufacturing Engineer.
>
> AMF Harley-Davidson Motor Company 1976 - 1978
>
>  Project Test Engineer for golf cart products.  Reviewed designs,
> administered test programs and supervised four experimental mechanics.
>
> EDUCATION & PROFESSIONAL
>
>  Master of Management (Cum Laude) Northwestern University, 1984
>  B.S., Mechanical Engineering, Carnegie-Mellon University, 1976
>  Registered Professional Engineer (P.E.), State of Illinois
>

Does anyone have access to HP 8753 Network analyzer and the ability to test
at 75Ohms?  Any assistance/direction will be greatly appreciated.

thanks

Steve Pilipchuk
Wallace Electronics
10551 Miller Road, Suite 100
Dallas, Texas  75238
P(214) 340-0400 x18
F(214) 340-0404

If you get this message you made it to the other side :-)

If you didn't get this message, sorry, you must be the weakest link.

Welcome to the WHMA ListServ on Yahoo. It is very similar to the old
ListBot, just different addresses. The are:

Post message: whma@yahoogroups.com
Subscribe:  whma-subscribe@yahoogroups.com
Unsubscribe:  whma-unsubscribe@yahoogroups.com
List owner:  whma-owner@yahoogroups.com

Or you can do everything on the web at:

groups.yahoo.com/group/whma

Give it a try. Everyone has something they want to get rid of. Just
write an email and send it to whma@yahoogroups.com.

REAL EXAMPLE

For sale, 28/19 teflon, UL1213, Blk and Red, tens of thousands of
feet. Cheap!! Make offer.  bill@...

Now - you go ahead and post one of your surplus items.

Bill@...